BALL BEARINGS
1"-ID THRUST BALL BEARING - INAW1>
BEARING-NTNSX1276PX1 >
STAINLESS STEEL DOUBLE SHIELDED BALL BEARING-GULSSR8ZZ >
STAINLESS STEEL BALL BEARING-IDCSSR122RS >
STAINLESS STEEL BALL BEARING-IDCSSR102RS >
SS 8-MM-ID TWO SHIELD BALL BEARING-GULSS6282Z>
The MRC R14FF is a single-row, inch-sized Conrad radial deep groove ball bearing manufactured by MRC (a brand of SKF). It features double metal shields (designated by the "FF") to keep lubricant in and contaminants out. Physical Specifications Bore Diameter (ID): 0.8750 inches (7/8 in) Outside Diameter (OD): 1.8750 inches (1-7/8 in) Overall Width (B): 0.5000 inches (1/2 in) Weight: 0.23 lbs.
BEARINGS
LM-67048/LM-67010 BEARING SET-NTNSET6 >
LM-48548/LM-48510 BEARING SET-NTNSET5 >
L-44649/L-44610 BEARING SET-NTNSET4 >
JL-26749/JL-26710 BEARING SET-NTNSET39 >
LM-104949/LM-104911 BEARING SET-NTNSET38 >
LM-603049/LM-603011 BEARING SET-NTNSET37 >
LM-501349/LM-501310 BEARING SET-NTNSET35 >
320/28XX 1 BEARING SET-NTNSET32 >
M-12649/M-12610 BEARING SET-NTNSET3 >
LM-11949/LM-11910 BEARING SET-NTNSET2 >
L-68149/L-68111 BEARING SET-NTNSET17 >
L-45449/L-45410 BEARING SET-NTNSET15 >
L-44643/L-44610 BEARING SET-NTNSET14 >
L-68149/L-68110 BEARING SET-NTNSET13 >
7/16"-HEX BORE BEARINGS-SCHAFH2852 >
11/16"-HEX BORE BEARINGS
Recently Viewed
1/4" X 4" STANDARD TIP OFFSET SCREWDRIVER
BBI 455666 Fully Threaded Cap Screw, 1-8, 2-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455666 Fully Threaded Cap Screw, 1-8, 2-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
45-DEGREE COPPER TO COPPER; SWEAT SOLDER FITTING; 1/2" TO 1/2" NOMINAL COPPER-JWH418319 >
16-MM EXTERNAL RETAINING RING-ANR1400016MM >
Browning® TorqTaper® Plus PF0004 Type SMTP Shaft Mount Reducer, Solid Shaft Input, Tapered Bore Output, 1 hp, 9:1 Gear Ratio, 17 rpm Maximum Output, 36.013 in-lb Input/3707.29 in-lb Output Torque Rating
Shaft mount reducers are enclosed helical gear reducers with a hollow output. They are mounted directly on the input shaft of the driven machine and are supported by the shaft and torque arm arrangement or motor mount frame. This eliminates the need for additional components to transmit torque from the reducer to the equipment.
Porter-Cable® 48233 Wrench, For Use With 304 Disc Sander and 305 Sander/Polisher
