BALL BEARINGS
211-MF MRC BALL BEARING
Bore Diameter: 55 mm Outside Diameter: 100 mm Width: 21 mm Max RPM (Grease): 5200 rpm Max RPM (Oil): 6300 rpm Radial Dynamic Load: 48,400 N (10,900 lb.) Radial Static Load: 44,000 N (9890 lb.)
211-M-FF MRC BALL BEARINGS
Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings
209-SFF Single Row Deep Groove Ball Bearing
Bore Diameter (ID): 45 mm Outside Diameter (OD): 85 mm Overall Width: 19 mm Closure Type: Double Shielded (Metal shields on both sides Internal Clearance: C3 (greater than normal radial internal clearance) Max Speed: Up to 9,000 RPM Material: High-quality bearing steel
209-MF Single Shielded Ball Bearing
he MRC 209MF is a single-row deep groove radial ball bearing with filling slots (a "max type" bearing). It features a 45 mm inner diameter, 85 mm outer diameter, and 19 mm width, and includes a single shield. It accommodates higher radial loads than standard bearings but cannot handle significant thrust loads.
208-W-DD Maxload Double Shielded Ball Bearing
MAXLOAD DOUBLE SHIELDED BALL BEARING - FAF208WDD>
208-SFF Wide Single Row Bearing
The MRC 208SFF is a heavy-duty, single-row deep groove radial ball bearing manufactured by MRC (a brand under SKF). It features a straight bore and a double-shielded closure ("FF" suffix), making it highly effective at retaining grease while keeping out dust and contaminants. Key Technical Specifications Bore Diameter (Inner ID): 40 mm Outside Diameter (OD): 80 mm Width: 18 mm Enclosure Type: Double Shielded (Metal shields on both sides) Dynamic Load Capacity: 6,900 lb. Static Load Capacity: 4,270 lb. Maximum Speed: 10,000 RPMInterchange Equivalents: Cross-references directly with standard industry part number 6208-2Z (or 6208-ZZ).
208-S-ZZ-C Wide Single Row Bearing
Cylindrical Bore Deep Groove Ball Bearing
Item #100760654
Deep Groove Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
208-CFF MRC BALL BEARINGS
The MRC 208CFF is a single-row deep groove type ball bearing featuring two metal shields. Manufactured under the MRC brand (by SKF), this specific configuration is equivalent to a standard 6208-2Z or 6208ZZ bearing. Key Specifications Bore Diameter (Inner): 40 mm Outside Diameter: 80 mm Width: 18 mm Closure Type: Double Shielded (indicated by the FF suffix).
207 Double Open Max Load Ball Bearing
DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>
206-M Double Open Faced Ball Bearing
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 12/C120 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 124 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Powerâ„¢ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
ISOSTATIC™ Oilube® 401112 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 1/2 in W
NEEDLE BEARING-INAHK1210>
NEEDLE BEARINGS-INAHK2526>
OIL SEALS-1.375" X 2.716" X .313"-CHI13900>
OIL SEALS-1.494" X 2.060" X .270"-CHI14789>
