V-BELTS BANDED 3V-5V-8V
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
2-GRV BANDED B56 V-BELT-PIXB56/02>
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
2-GRV BANDED B-50 V-BELTS-PIXB50/02>
V-BELTS-PIX8V3350>
V-BELTS-PIX8V3000>
V-BELTS-JAS8V3000>
4-GRV BANDED 5-V-2800 V-BELTS-PIX5V2800/04>
V-BELTS-JAS8V2500>
V-BELTS-JAS8V2500>
V-BELTS-PIX8V2240>
5-GRV BANDED 8-V-2120 V-BELT 212"-PIX8V2120/05 >
V-BELTS-JAS8V2120>
12-GRV BANDED 8-V-2000 V-BELTS-PIX8V2000/12>
12-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/12>
8-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/08>
Recently Viewed
INTERCHANGEABLE WITH ALL TYPES OF CAM LEVER COUPLERS. PRECISION MOLDED, MADE OF POLYPROPYLENE IS GLASS FILLED FOR A RUGGED STRENGTH AND DURABILITY. 300 PSI MAX
-BAJ100125CAP >
BANJO CR150 POLYPROPYLENE PIPE FITTING, CROSS, SCHEDULE 80, 1-1/2" NPT FEMALE
CROSS FOR CONNECTING AND BRANCHING FOUR PIPES. FEMALE NPT THREADS FOR CONNECTING TO MALE NPT THREADED PIPES. PRECISION MOLDED IN STERILIZABLE POLYPROPYLENE FOR DIMENSIONAL STABILITY AND REINFORCED WITH FIBERGLASS FOR ADDED DURABILITY, STRENGTH, AND CHEMICAL RESISTANCE. HANDLES PRESSURES UP TO 150 PSI AT 70 DEGREES F.
-BAJCR150 >
V-20153 BANJO Replacement Handle for 1-1/4" FP - 2" PP Ball Valves
HANBLE FOR V125FP-V150-V200
STAINLESS STEEL RINGS, ARMS AND MDASH: PINS. MOST COMPLETE LINE OF POLYPROPYLENE COUPLINGS AVAILABLE., INTERCHANGEABLE WITH ALL TYPES OF CAM LEVER COUPLERS. POLYPROPYLENE IS GLASS FILLED FOR RUGGED STRENGTH AND DURABILITY. MAXIMUM OPERATING PRESSURE 225 PSI
-BAJ300PL >
BANJO NIP-100-SH Pipe Fitting Short Nipple | 1" Male NPT x 1" Male NPT | Length: 2" | 300 PSI | Polypropylene
GLASS REINFORCED POLYPROPYLENE. HEAVY DUTY (SCHEDULE 80). LIGHTWEIGHT WITH EXCELLENT STRENGTH. NPT THREADS. EXCELLENT CHEMICAL RESISTANCE. PRESSURE TO 150 PSI.
6-GRV BANDED 5-V-1600 V-BELT-JAS6R5V1600 >
