Router Accessories
Porter-CableĀ® 42157 Double Ended Collet Wrench, For Use With 100 1-1/16 and 1-1/8 in Routers
Porter-CableĀ® 59370 Single Door Hinge Template, 1/4 in Collet, For Use With 1/4 in Collet Router
Protect against accidents and keep every job running smoothly with this plunge router base from Porter-CableĀ®. The 6931 is made specially for use with routers 690, 9690 and 691, giving you more options and flexibility when completing projects. It also saves you money by supplying the plunge feature you need, without necessitating the purchase of a whole new router. Lightweight and easy to use, the 6931 offers six depth stop positions and completely enclosed springs for consistent operation, as well as a convenient 2-1/2 in plunge range.
Porter-CableĀ® 18055 Open End Wrench, For Use With Speedtronicā¢ 518 3 hp Router, J-5182 Motor
Porter-CableĀ® 1001 Replacement Router Fixed Base, For Use With Porter-CableĀ® Model 100 and 690 Series Fixed Base Routers, 3-1/2 in Dia 1.75 hp 690LR, 6902, 6902VS Router Motor
The Porter-CableĀ® standard router edge guide provides controlled cuts for consistent results. It uses the straight edge of the workpiece to guide the router for edge cuts, as well as inside cuts. This edge guide is easy to set-up and adjust with simple thumbscrew clamps. It fits Porter-CableĀ® routers, models 100, 150, 350, 630, 670, 690, 693 and 691 (with Type 1 or 2 base). Made with all metal construction.
Porter-CableĀ® 10695 Router Sub-Base, For Use With 514, 518, 520, 7518, 7519 and 7536 2-1/2 hp Plunge Routers, 1-1/8 in Center Hole
Porter-CableĀ® 42186 Replacement Router Sub-Base, For Use With 100, 690, 691, 693, 9690, 693PK and 890 Router, 1-1/8 in Center Hole, 5-3/4 in Dia Base
Porter-CableĀ® 698 Heavy Duty Router Table, 2-1/2 in Hose
Porter-CableĀ® 42045 template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed.
Porter-CableĀ® 43912 Ball Bearing Pilot With Collar, 7/8 in OD, For Use With Standard Router, 1/4 in ID
Amazon.com Why hire a locksmith or struggle with a chisel when you can install doorknobs yourself with minimal effort? The Porter-Cable 59375 is a professional quality kit that makes it a snap to mortise latch and strike plate openings with any collet router measuring 1/4 inch. The various settings for strike and latch plate sizes ensure precise results. (The strike plate sizes include 1-1/8-by-2-3/4 inches, 1-1/2-by-2-1/4 inches, and 1-1/2-by-2-3/4 inches and latch plate sizes of 1-by-2-1/4 inches, 1-1/8-by-2-1/4 inches, and 1-1/8-by-2-3/4 inches.) Compatible with doors with a thickness of 1-3/8 inches and 1-3/4 inches, the 59375 comes with a high-speed steel router bit and bearings, brads, and instruction manual.
Porter-CableĀ® Tru-Matchā¢ 6921 Edge Jointing System, For Use With Router
Recently Viewed
HCI Preferred Supplier 29907 Mold Coolant-Line Plug, 3/8 in Nominal, MIP, 200 psi Pressure, Brass/Silicone Seal
HCI Preferred Supplier 29907 Mold Coolant-Line Plug, 3/8 in Nominal, MIP, 200 psi Pressure, Brass/Silicone Seal
GPĀ® 3096D Deep Length Socket, 3/4 in, 3 in Hex Socket, 6 Points
ProtoĀ® J443/8 Prick Punch, 3/8 in Parabolic Steel Tip, 5-1/4 in OAL
6-32" BOTTOMING TAP-PDTEK50906323B >
2-7/16"-ID PILLOW BLOCK UNITS-SEANP39 >
GatesĀ® Power Transmission Poly ChainĀ® GTĀ® Carbonā¢ 14MGT-2800-37 Synchronous Belt, 37 mm W, 2800 mm OAL, 14 mm Pitch, 200 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates Poly Chainā¢ GTā¢ Carbon drive system instead of roller chain in your next power transmission application. The patented use of carbon fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness. When combined with Gates Poly Chain GT sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
