Cordless Tube & Pipe Cutters
412732 DO-IT-BEST/HWI PRODUCTS
16-OZ CAN PURPLE PRIMER IS FOR USE WITH PVC AND CPVC PIPE AND FITTING. DESIGNED TO DISSOLVE DIRT, GREASE, AND GRIMES AND TO SOFTEN THE PIPE SURFACE FOR A PERMANENT SOLVENT WELD-JWH412732 >
Milwaukee® 2471-20 Cordless Tubing Cutter, 1/2 to 1-1/8 in OD Cutting, 12 V DC, Li-Ion Battery
The MILWAUKEE® M12™ Copper Tubing Cutter is the industry’s first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM for unmatched cutting speed. The M12™ Battery (sold separately) and ultra-efficient gearing allow it to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8” to 1” (OD from ½” to 1-1/8”). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2” clearance, and the lightweight, the inline design provides a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps monitor the charge precisely, so there’s less downtime on the job.
Milwaukee® 2471-21 Cordless Copper Tubing Cutter Kit, 1/2 to 1-1/8 in OD Cutting, 12 V DC, Li-Ion Battery
The MILWAUKEE® M12™ Copper Tubing Cutter is the industry’s first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM for unmatched cutting speed. The M12™ Battery (sold separately) and ultra-efficient gearing allow it to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8” to 1” (OD from ½” to 1-1/8”). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2” clearance, and the lightweight, the inline design provides a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps monitor the charge precisely, so there’s less downtime on the job. This kit includes an M12™ Copper Tubing Cutter, an M12™ Battery Charger, and an M12™ REDLITHIUM™ CP2.0 Battery Pack.
Recently Viewed
30-TON CENTER HOLE HYDRAULIC RAM - ENERCH306>
Milwaukee® MX4™ 48-20-3923 4-Cutter Rotary Hammer Drill Bit, 5/8 in Drill Bit, 45/64 in, 54 in D Cutting, Carbide Cutting Edge, 60 in OAL
The MILWAUKEE® MX4™ 4-Cutter SDS Max Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. Milwaukee designed their MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Optimized flutes remove dust faster, reducing heat and delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
The Milwaukee® SDS plus bits with 1/4 in. hex are designed specifically for Tapcon® screw applications. Built to take on brick, block, and concrete Milwaukee SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate, and reduce Carbide chipping. To be used with drive sleeve available in the SDS-Plus Tapcon® installation kit (48-20-7497). Tapcon® is a registered trademark of Illinois tool works Inc.
The Grey Pneumatic 1/2" Drive x 34mm Standard - 12 Point Socket (2134M) is designed for high performance and durability, making it an ideal tool for professional mechanics and DIY enthusiasts alike. Its robust construction ensures reliable operation under demanding conditions.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from high-quality chrome-molybdenum steel for long-lasting performance.
Impact Tool Compatible: Engineered to withstand the high torque and force generated by impact tools.
Enhanced Strength: Unique design redirects pressure to the thicker part of the socket wall for increased durability.
High Torque Drive: Reduces wear on the fastener and socket corners, improves strength, and allows for easier access to tight spaces.
SPECIFICATIONS:
Drive Size: 1/2"
Socket Size: 34mm
Points: 12
Type: Standard (not deep)
Material: High-quality steel (chrome-molybdenum)
Appleton® UNILETS™ FDC150 Type FDC Deep Heavy Duty Device Box With Internal Ground Screw, Malleable Iron, 25 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.56 in H x 2.81 in W x 2.69 in D
GP® 3028D Deep Length Socket, 3/4 in, 7/8 in Hex Socket, 6 Points
