Screw Extractor Sets
GEARWRENCH® 720DD Screw Extractor Kit, 5 Pieces
GEARWRENCH Bolt Biter Screw Extractors are designed with tapered side and tip cutting edges that work together to grip and turn the most stubborn fasteners. High strength steel construction delivers up to 50 times longer life compared to competitive extractors, and bi-directional capability allows you to reuse specialty fasteners in a pinch. They work with both hand and power tools, giving you total control over every extraction situation.
5 Piece, Spiral Screw Extractor Set, Designed For Softer Materials Or Thin Walled Pieces Such As Pipes & Fittings, Design Eases Extraction Because It Does Not Expand The Material As You Remove It, Removes Both Left Hand & Right Hand Threaded Parts, Includes Extractors #1 Through #5.
The IRWIN HANSON Spiral Flute Screw Extractor Set, 6 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6 extractors.
Irwin® Hanson® 53625 Straight, 4 Pieces
This IRWIN HANSON 536/526 Series 5-Piece Straight-Flute Screw Extractor Set is designed for softer materials or thin-walled pieces, such as pipes and fittings. The design on these screw extractors eases extraction because it does not expand the material as it is removed. Each IRWIN screw extractor can remove both left-hand and right-hand threaded parts and has the size and recommended drill bit size etched onto it.
Irwin® Hanson® 53702 537 Aggressive Left Hand Screw Extractor and Drill Bit Combo Pack, 2 Pieces, HSS
Packaged with correct size drill bit, high speed drill bit ensures fast, clean drilling.
MORSE® 20218 7300 Screw Extractor Set, For Use With 3/8 to 1 in Pipe and 3/4 to 2-1/8 in Screw, Carbon Steel
MORSE® 20217 7300 Screw Extractor Set, For Use With 1/8 to 1/4 in Pipe and 3/16 to 3/4 in Screw, Carbon Steel
RIDGID® 35580 Screw Extractor Set
Recently Viewed
Four-Slot Yoke: The heat-treated alloy steel yoke features four slots, allowing it to transition between 2-hole and 3-hole pulling setups seamlessly. Shaft Protection: Features a floating swivel designed to prevent costly damage to the end of the crankshaft or shaft ends. Kit Components: The standard 15-piece kit consists of the central yoke, a robust manual pressure forcing screw, and a collection of standard pulling screws. Weight & Portability: The tool weighs approximately 2.7 to 2.8 lbs. and typically includes a custom molded carrying case.
Crescent® 0013C Replacement Cutterhead, For Use With 0090FC and 0090MC Center Cut Cutter, #0 Center Cut, Alloy Steel
Since 1880, Crescent H.K. Porter® has been the preeminent brand in industrial cutters with a worldwide reputation for quality, strength, and durability. The extensive line of products includes manual cutters, pneumatic cutters and accessories, designed to handle everything from light wires and brushes to heavy steel rods and bars.
Armstrong 25-332 6 Point 1" Full Polish Long Pattern Combination Wrench USA
BOX ENDS INCORPORATE A RADIUS CORNER DESIGN THAT ENGAGES THE FLATS OF THE FASTENER, NOT THE CORNERS, PROVIDING UP TO 15% -20% MORE TORQUE WHILE REDUCING FASTENER ROUNDING, ENHANCING THE TURNING OF WORK.
BOX ENDS ARE OFFSET A TRUE 15 FOR CLEARING OBSTRUCTIONS AND KNUCKLE CLEARANCE ON FLAT SURFACES.
17-MM 6-PT 1/2"-DR SOCKETS-APX17MM15>
MAXCO Inspire Series™ 50 Offset Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 5/8″ Pitch
5/8" 12-PT LONG BLACK COMB/WRENCH-ARS30220>
