Rotary Hammer Accessories
7354 DANAHER TOOL GROUP, INC.
A4033" 1/2" X 33JT STRAIGHT SHANK ARBOR-JAC7354 >
7356 JACOBS CHUCK
5/8" X #2-JT A-4102 STRAIGHT SHANK ARBOR - JAC7356>
7360 JACOBS CHUCK
5/8" X #33-JT A-4133 STRAIGHT SHANK ARBOR - JAC7360>
763054-5-A 6093-dw Drill Chuck
6093-DW DRILL CHUCK AND KEY-MAK7630545A>
798146-1 2" X 11-7/8" Rubber Hammer Scaling
2" X 11-7/8" RUBBER HAMMER SCALING CHISELS-MAK7981461 >
Bosch 688-01 Cut Off Wheel Cutting Kit, 0.032 in Kerf, 35000 rpm Speed
Bosch 688-01 Cut Off Wheel Cutting Kit, 0.032 in Kerf, 35000 rpm Speed
HS-1817 BOSCH TOOLS
2 In. x 12 In. Scaling Chisel Tool Round Hex/Spline Hammer Steel-BSHHS1817>
Milwaukee® 05-78-0071 Field Screw, For Use With 5340-20 Serial A49A 2 in Spline Rotary Hammer
Milwaukee® 05-78-0071 Field Screw, For Use With 5340-20 Serial A49A 2 in Spline Rotary Hammer
Milwaukee® 22-18-0800 Brush Service Kit, For Use With 5366-1 Serial 793D 3/4 in Rotary Hammer
Milwaukee® 22-18-0800 Brush Service Kit, For Use With 5366-1 Serial 793D 3/4 in Rotary Hammer
Milwaukee® 22-18-0870 Carbon Brush Kit, For Use With 5346-21 Serial 187B 1-3/4 in SDS MAX Rotary Hammer, 120 VAC
Milwaukee® 22-18-0870 Carbon Brush Kit, For Use With 5346-21 Serial 187B 1-3/4 in SDS MAX Rotary Hammer, 120 VAC
Milwaukee® 48-03-3010 Spline to SDS-Max Adapter, For Use With Spline Shank Rotary Hammer Drill, 1/8 in Shank, Steel
The MILWAUKEE® carbide-tipped drill bits come in a variety of diameters and lengths with either SDS Plus, SDS Max, or Spline shanks. Milwaukee bits are available in either two-cutter or four-cutter head geometries. The bodies of these bits allow for maximum energy transfer from the hammer to the bit. The optimized flutes provide the fastest debris extraction, speeding up drill rates. The highest-quality carbide maximizes material pulverization. This adapter allows the use of SDS Max shank accessories in a Spline shank rotary hammer.
Milwaukee® 48-03-3012 SDS-MAX to Spline Adapter, For Use With SDS Max® Shank Rotary Hammer Drill, SDS-Max® Chuck Fitment, Carbide Tip
This adapter allows the use of spline shank accessories in a SDS-Max shank rotary hammer.
Milwaukee® 48-03-3015 Spline to SDS-Plus Adapter, For Use With Any Spline Hammer and SDS-Max® Carbide, Spline/SDS Shank
This adapter allows the use of SDS-Plus shank accessories in a spline shank rotary hammer.
Milwaukee® 48-03-3025 Bit Adapter, SDS-Max® Chuck Fitment, 1 in Dia Shank, SDS-Max® to 5/8-11 Thread Bit Adapter Conversion, Carbide/Steel
Expand the versatility of your rotary hammer with the MILWAUKEE® SDS Max to SDS Plus Chuck Adapter. This adapter allows for SDS Plus accessories to be used with an SDS Max rotary hammer giving you the ability to use only one tool for all jobs – resulting in increased productivity and minimal hassle. The adapter is designed to last, providing long life on the job. Maximize the value of your rotary hammer with Milwaukee® carbide chuck adapters.
Milwaukee® 5318-DE Standard Chisel Boot, For Use With SDS Max® Rotary Hammers, 1 in W Blade, 5-3/4 x 3-1/2 in Shank, Plastic
The Milwaukee 5318-DE SDS max chisel boot provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 5318-DE SDS max chisel boot is optimized for the 2717-22 and 5317-21 Milwaukee SDS max rotary hammers for chipping applications with bull point and flat chisels up to 1-1/8 in. in diameter. Its adjustable strap secures the hose away from the application allowing for increased productivity. Attach to the Milwaukee 8960-20 8 Gallon dust extractor for a complete OSHA table 1 compliant solution.
Milwaukee® M12™ 2306-20 Universal Dust Extractor, For Use With SDS Max® Rotary Hammers, 12 V Voltage, Lithium-Ion Battery, Metal/Plastic/Rubber Overmold
The only universal tool of its kind on the market, the cordless Milwaukee® M12™ HAMMERVAC™ universal dust extractor delivers HEPA-standard debris filtration at the lowest cost of ownership. The HAMMERVAC™ universal handle system is compatible with major brands of SDS PLUS® rotary hammers and AC/DC hammer drills, so users can drill safely into concrete and masonry without purchasing a new drill. It features a certified HEPA filter that is replaced independently of the dust box, enabling users to maintain powerful suction at a low cost. In auto-on mode, the extractor turns itself On and Off as you work for maximum productivity. Powered by an M12™ Compact REDLITHIUM™ battery (sold separately), the HAMMERVAC™ provides filtration for upto 160 holes on a single charge. For even longer runtime, utilize the M12™ XC High Capacity REDLITHIUM™ battery (sold separately). Includes a HEPA filter, nozzle, 3 side-handle clamping collar assemblies and a carrying case.
Recently Viewed
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
ILSCO® NIMBUS® PBTS-2-350 Type PBTS 1-Sided Entry 2-Port Dual Rated Insulated Multi-Tap Connector, Aluminum/Copper Conductor, Aluminum
ARC™ 11365 80G Coated Flap Wheel, 3 in Dia Wheel, 1/2 in W Face, 1/4 in Dia Shank, 80 Grit, Medium Grade, Aluminum Oxide Abrasive
Mounted and unmounted flap wheels are a great choice for light grinding, blending, deburring and finishing applications on a variety of metals. Flap wheels conform to many geometries and the radial flap design provides a continuous supply of fresh grain for consistent cutting action. Mounted flap wheels are most commonly used on die grinders.
Proto® J9213M Nut Driver, 13 mm, Round/Solid Shank, Fluted Handle, ASME B107.110-2012, Polished Chrome
Proto® J9213M Nut Driver, 13 mm, Solid Round Shank, Fluted Handle, ASME B107.110-2012, Polished Chrome
3/16" HEX INSULATED NUTDRIVER-KLE6303/16INS >
Browning® 3894045 Split Taper Bushing, 1-3/8 in Dia Bore, 2.5567 in Small End/2.625 in Large End Dia Barrel, 3-11/16 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning® 1079326 Split Taper Bushing, 1-7/8 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
