Demolition Hammer Accessories
Black&Decker 1"-WIDE X 12"-LONG COLD CHISELS BD- DW-5953
DeWALT® DW5953 Flat Head Cold Chisel, For Use With All Brands of 3/4 in Hex Chipping and Demolition Hammers, 1 in W Head, 12 in OAL, 1 in Dia
Black&Decker 10" SDS PLUS BULL-POINT CHISELS BD- DW-5348
Featuring a fully hardened steel body for helps to increased life and Extreme durability, DEWALT chisels & demolition steel are ideal for chipping and breaking a range of masonry materials. Sturdy enough for tough jobsite demands.
Chicago Pneumatic P054177 Stylus Assembly, For Use With CP9361-1 Air Scribe Engraving Pen Kit
Chicago Pneumatic P054177 Stylus Assembly, For Use With CP9361-1 Air Scribe Engraving Pen Kit
JET® J0101S Replacement Standard Spring Retainer, For Use With JSG Riveting Hammers
JET® J0101S Replacement Standard Spring Retainer, For Use With JSG Riveting Hammers
Makita® 197172-1 Dust Extraction Attachment, For Use With Makita® HM1812, HM1812X1 1-1/8 in Hex Demolition Hammers
There is increased awareness of the importance of dust extraction on job sites and Makita® is meeting demand with a growing range of dust extraction solutions. The Dust Extracting Attachment (197172-1) is ideal for use with demolition hammer (1-1/8 in hex shank). It attaches directly onto the bit shaft, from 1 to 4 in away from the surface and the hose is kept out of the way with the convenient hose holders. When used with a job site vacuum (sold separately), the attachment is engineered for maximum dust extraction.
Milwaukee® 48-62-2046 Ground Rod Driver, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 10 in OAL, 3/4 in Hex, 21/32 in Round Shank, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Drop forged of high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed. One per package.
Milwaukee® 48-62-2070 Bushing Tool, For Use With 5345-21 Rotary Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee® 48-62-2080 Seam Tool, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 1 in W Head, 12 in OAL, 3/4 in Hex, 21/32 in Round Shank
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing old mortar, tuck pointing, caulking and seaming. One per package.
Milwaukee® 48-62-2095 Clay Spade, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 4-1/2 in W Head, 16-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-3070 Ground Rod Driver, For Use With 5337-21 Demolition Hammer, 9-3/4 in OAL, 3/4 in Hex, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Milwaukee Tool is an industry leading manufacturer of professional, heavy duty power tools and accessories. Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 C. The Milwaukee 48-62-3070 is a 9-3/4 in. x 3/4 in. Hex ground rod.
Milwaukee® 48-62-3085 Bushing Tool, For Use With 5337-21 Demolition Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee® 48-62-3090 Asphalt Cutter, For Use With 5337-21 Demolition Hammer, 5 in W Head, 16-1/2 in OAL, 3/4 in Hex Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4000 Moil Point, For Use With Demolition Hammers, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. Features: moil point. 1-1/8 in. collared hex shank with notch. 20 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-4010 Chisel, For Use With Demolition Hammers, 3 in W Head, 20-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cleaning concrete, scale, rust, cutting troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4020 Asphalt Cutter, For Use With Demolition Hammers, 5 in W Head, 17-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Features: asphalt cutter. 1-1/8 in. collared hex shank with notch. 5 in. width x 17-1/2 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-4030 Clay Spade, For Use With Demolition Hammers, 5-1/2 in W Head, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-4045 Ground Rod Driver, For Use With Demolition Hammers, 3 in W Head, 15-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch, 3 in D Socket, 0.906 in ID, 5/8 in and 3/4 in Dia Rod, 1 in Hole
Drives soft ground rods. Socket depth - 3 in., inner diameter - .906. rod diameter 5/8 in. and 3/4 in., length 15-1/2 in.
Milwaukee® 48-62-4065 Bushing Tool, For Use With SDS Max® 5315-21 Rotary Hammer, 1-3/4 in W Head, 10-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Bushing tools are ideal for leveling concrete surfaces and removing excess concrete during finishing work. Additional, bushing tools can be used to roughen a smooth concrete to prepare the surface for additional concrete or a coating. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4066 Asphalt Cutter, For Use With SDS Max® 5315-21 Rotary Hammer, 5 in W Head, 16-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4068 Clay Spade, For Use With SDS Max® 5315-21 Rotary Hammer, 4-1/2 in W Head, 16-5/8 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for digging clay, hard packed gravel, dirt (do not use for concrete). This chisel is specifically designed for SDS Max® rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4091 Ground Rod Driver, For Use With SDS Max® 5315-21 Rotary Hammer, 5446-21 and 5339-21 Demolition Hammer, 9-3/4 in OAL, Slotted, 18 mm Round Shank, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 collared hex with notch). The Milwaukee 48-62-4091 is a 9-3/4 in. SDS Max demo ground rod driver. This demolition steel hammer accessory is ideally used with Milwaukee SDS Max demolition hammer 5446-21 and 5339 - 21. made from forged high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed.
Recently Viewed
5-GAL ASTRO-SAW 2001A SAWING FLUID-MNR44050 >
Milwaukee® 2526-20 M12™ FUEL™ Cordless Oscillating Multi-Tool Kit, 10000 to 20000 opm Speed, 12 V DC, Li-Ion Battery, 1 Battery, Yes, Variable Speed Dial Switch
The MILWAUKEE® M12 FUEL™ Oscillating Multi-Tool generates the fastest 12V cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery (not included) delivers most work of any 12V battery on the market. The M12 FUEL™ Oscillating Multi-Tool has a 12-Setting Dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility.
MORSE® 73324 4121 Standard Tool Bit, Carbide Tip, C6 Tip Material Grade, B Style, 1/2 in H x 1/2 in W Shank, 3-1/2 in OAL, Right Hand Cutting, Industry Standard Number: BR-8
90-LUMEN LED 3-MODE HEAD LIGHT - NEB6003>
CHAIN BREAKER TOOL TIP-BRW60TOOLTIP >
GEARWRENCH mechanics tools have all been designed with the professional user in mind to increase productivity, access, and strength. The ratchets, sockets, and wrenches are made from premium alloy steel and feature a full polish chrome finish that resists rust and corrosion. Large, hard-stamped markings allow for easy identification and can be easily recognized as SAE (double line) or metric (knurled line). additionally, the off-corner loading design puts force on the flats of fasteners for improved durability and reduced fastener rounding.
