V-BELTS BANDED 3V-5V-8V
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
2-GRV BANDED B56 V-BELT-PIXB56/02>
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
2-GRV BANDED B-50 V-BELTS-PIXB50/02>
V-BELTS-PIX8V3350>
V-BELTS-PIX8V3000>
V-BELTS-JAS8V3000>
4-GRV BANDED 5-V-2800 V-BELTS-PIX5V2800/04>
V-BELTS-JAS8V2500>
V-BELTS-JAS8V2500>
V-BELTS-PIX8V2240>
5-GRV BANDED 8-V-2120 V-BELT 212"-PIX8V2120/05 >
V-BELTS-JAS8V2120>
12-GRV BANDED 8-V-2000 V-BELTS-PIX8V2000/12>
12-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/12>
8-GRV BANDED 8-V-1900 V-BELTS-PIX8V1900/08>
Recently Viewed
3 GROOVE BANDED 5-V-850 V-BELT-JAS3R5V850 >
DOUBLE OPEN FACE BALL BEARINGS-KOY6206>
4-GRV BANDED 3-V-475 V-BELT-JAS4R3V475 >
M-220-200-HBT BANJO 2" Full Port Manifold Flange x 2" Hose Barb Tee fluid handling fitting.
Fitting Profile: Designed to bridge two separate sections of 2" liquid hose at the run while branching cleanly into an M220 flanged manifold system on the side leg. Connection Sizing: Features dual 2" barb ends for quick hose push-on alongside a 2" full-port manifold flange outlet. Pressure Capacity: Engineered to sustain steady pressure configurations up to 150 PSI at ambient temperatures (70°F), with select heavy-duty agricultural assemblies safely supporting a maximum ceiling of 300 PSI. System Advantages: Its full-port architecture guarantees unrestricted, high-volume flow paths that minimize system turbulence and fluid friction
5-GROOVE BANDED 5-V-2800 V-BELT - JAS5R5V2800>
BANDED V-BELTS-JAS5R5V950>
