BANJO FITTINGS & ACCESSORIES
BANJO TF-200 3/4"BULKHEAD EPDM TANK FITTING, 1-5/8" HOLE SIZE, 300PSI
MAXIMUM PRESSURE: 300 PSI GASKET. EPDM ITEM, BULKHEAD TANK FITTING BODY MATERIAL IS POLYPROPYLENE COLOR, BLACK,
-BAJTF200 >
MAXIMUM PRESSURE: 300 PSI GASKET. EPDM ITEM, BULKHEAD TANK FITTING BODY MATERIAL IS POLYPROPYLENE COLOR, BLACK,
-BAJTF220 >
LID MADE OF POLYPROPYLENE, NPT THREADS, TPV GASKET
-BAJTL650S >
MANUAL TWO-WAY BALL VALVE, BODY MATERIAL POLYPROPYLENE, FOR MEDIA CORROSIVE CHEMICALS, WATER, VALVE CONSTRUCTION THREE PIECE. NOMINAL VALVE SIZE 3/4", VALVE BODY STYLE STRAIGHT. OPERATING PRESSURE 300 PSI. BALL MATERIAL POLYPROYLENE, BALL PORT STYLE FULL PORT.
-BAJV075 >
1" STANDARD PORT VALVE, FNPT X FNPT, IS ENGINEERED FOR RELIABLE FLUID CONTROL IN VARIOUS INDUSTRIAL APPLICATIONS. THE 4-BOLT DESIGN FEATURING 304 STAINLESS STEEL BOLTS AND NUTS ENSURES SECURE AND STABLE INSTALLATION. EQUIPPED WITH FKM SEALS, THIS VALVE OFFERS OPTIMAL CHEMICAL RESISTANCE AND LONGEVITY. SELF-ALIGNUNG BALL. SELF LUBRICATING STEM BUSHINGS AND SEATS PREVENT STICKING OR BINDING.
BAJV100 >
BANJO V-100-FP 4 BOLT BALL VALVE, FULL PORT, 1" FEMALE NPT X 1" FEMALE NPT. OPENING THRU BALL: 1", 300 PSI
FKM (VITON TYPE) SEALS. PRECISION MOLDED POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. SELF-ALIGNING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. THE VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. THE BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT, WHICH PROVIDES PRECISE CONTACT BETWEEN BALL AND SEATS. SELF-LUBRICATING STEM BUSHINGS. STAINLESS STEEL BOLTS
-BAJV100FP >
BANJO V-100-SL POLYPROPYLENE SIDE LOAD BALL VALVE, THREE PIECE, THREE WAY, FULL PORT, 1" NPT FEMALE
POLYPROPYLENE FOR CHEMICAL RESISTANCE AND LESS WIEGHT THAN IF MADE FROM METAL. SIDE LOAD FOR VALVES WITH A SIDE INLET. FULL PORT FLOW FOR HIGHER OPERATING EFFICIENCY THAN STANDARD PORT. THREE-PORT DIVERTING VALVE TO REGULATE FLOW AMONG THREE SECTIONS OF PIPE. FEMALE NPT THREADS FOR CONNECTING TO MALE THREADED PIPE FITTINGS.
-BAJV100SL >
BANJO V-125-FP POLYPROPYLENE BALL VALVE, THREE PIECE, FULL PORT, 1-1/4" NPT FEMALE
PIPE SIZE 1-1/4" OPENING THRU 1-1/2". MAXIMUM PSI IS 225. FKM VITON TYPE SEALS. PTFE SELF-LUBRICATING STEM BUSHINGS AND SEATS CANNOT STICK OR BIND.
-BAJV125FP >
PRECISION MOLDED POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. PTFE SELF-LUBRICATING STEM BUSHINGS AND SEATS CANNOT STOCK OR BIND. SELF-ALIGNING BALL MOVES FREELYAGAINST THE PTFE SEATS FOR SMOOTH OPERATION. MAXIMUM 225 PSI
-BAJV150 >
2" STANDARD PORT VALVE, FNPT X FNPT, IS ENGINEERED FOR RELIABLE FLUID CONTROL IN VARIOUS INDUSTRIAL APPLICATIONS. THE 4-BOLT DESIGN FEATURING 304 STAINLESS STEEL BOLTS AND NUTS ENSURES SECURE AND STABLE INSTALLATION. EQUIPPED WITH FKM SEALS, THIS VALVE OFFERS OPTIMAL CHEMICAL RESISTANCE AND LONGEVITY. SELF-ALIGNING BALL. SELF LUBRICATING STEM BUSHINGS AND SEATS PREVENT STICKING OR BINDING.
BAJV200 >
BANJO V-200-FP 4 BOLT BALL VALVE, FULL PORT, 2" FEMALE NPT X 2" FEMALE NPT. OPENING THRU BALL: 2", 300 PSI
FKM (VITON TYPE) SEALS. PRECISION MOLDED POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. SELF-ALIGNING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. THE VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. THE BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT, WHICH PROVIDES PRECISE CONTACT BETWEEN BALL AND SEATS. SELF-LUBRICATING STEM BUSHINGS. STAINLESS STEEL BOLTS-BAJV200FP>
BANJO V-200-SL POLYPROPYLENE SIDE LOAD BALL VALVE, THREE PIECE, THREE WAY, FULL PORT, 2" NPT FEMALE
POLYPROPYLENE FOR CHEMICAL RESISTANCE AND LESS WIEGHT THAN IF MADE FROM METAL. SIDE LOAD FOR VALVES WITH A SIDE INLET. FULL PORT FLOW FOR HIGHER OPERATING EFFICIENCY THAN STANDARD PORT. THREE-PORT DIVERTING VALVE TO REGULATE FLOW AMONG THREE SECTIONS OF PIPE. FEMALE NPT THREADS FOR CONNECTING TO MALE THREADED PIPE FITTINGS.
-BAJV200SL >
BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT. POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. PRECISION MOLDED IN POLYPROPYLENE. PTFE SELF-LUBRICATING STEM BUSHINGS AND SEATS CANNOT STICK OR BIND. SELF-ALIGNIING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. STAINLESS STEEL BOLTS. VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. MAXIMUM PRESSURE IS 225 PSI
-BAJV300 >
BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT. POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. PRECISION MOLDED IN POLYPROPYLENE. PTFE SELF-LUBRICATING STEM BUSHINGS AND SEATS CANNOT STICK OR BIND. SELF-ALIGNIING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. STAINLESS STEEL BOLTS. VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. MAXIMUM PRESSURE IS 225 PSI
-BAJV400 >
BANJO VA-150 1-1/2" POLY NOZZLE VALVE WITH 90-D ELBOW AND 8" SPOUT
LIGHWEIGHT HOSE AND VALVE FOR CONVENIENT TRANSFER OF LIQUIDS INTO DRUMS, TANKS, ETC. ANGLED END FLANGE WITH 8" LONG POLYPROPYLENE FILL SPOUT. POLYPROPYLENE CONSTRUCTION WITH ALL STAINLESS BOLTS. 225 MAXIMUM PSI
-BAJVA150 >
DRUM PUMP NOZZLES ARE FLOW CONTROL DEVICES THAT CONNECT TO THE END OF A DRUM PUMP DISCHARGE HOSE. THEY HAVE A SPOUT WHERE FLUID EXITS THE NOZZLE AND A TRIGGER CONTROL FOR STARTING, STOPPING, AND REGULATING THE RATE OF THE FLOW. THESE NOZZLES MINIMIZE PRODUCT WASTE AND REDUCE WEAR ON PUMP MOTORS BY ALLOWING FLOW TO BE CONTROLLED WITHOUT HAVING TO TURN THE PUMP ON & OFF. THEY ARE COMMONLY USED FOR DISPENSING FUELS AND AUTOMOTIVE FLUIDS
BAJVA200 >
BANJO VFMT-204-FP 2" FULL PORT STUBBY VALVE MALE ADAPTER X MALE NPT
TYPE A POLYPROPYLENE CAM AND GROOVE FITTINGS INCLUDE A MALE NIPPLE(ADAPTER) X FEMALE NPT CONNECTION
-BAJVFMT204FP >
BANJO VSFMT-200 STUBBY VALVE 2" MNPT X 2" FNPT STANDARD PORT BALL VALVE
STUBBY VALVES ARE USED IN VARIOUS AGRICULTURE AND INDUSTRIAL LIQUID FLOW APPLICATIONS. PTFE SEALS, STAINLESS STEEL BOLTS, GLASS FILLED POLYPROPYLENE, FOUR DESIGN OPTIONS, UNIQUE PATENTED COMPACT DESIGN WITH 100 PSI.
-BAJVSFMT200 >
1/4" POLY CAP1/4"-FPT THREADED POLY PIPE CAPS-BAJCAP025 >
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPT threads.
Maximum operating pressure 300 psi
Excellent chemical resistance.
Glass reinforced polypropylene.
Heavy duty (Schedule 80).
Lightweight with excellent strength.
NPTthreads.
Pressure to 150 P.S.I. at 70°F.
3" Poly Pipe Cap
Recently Viewed
BALL BEARING WITH SNAP RING-GUL7616DLG >
3" X 240" 2-PLY TWISTED-EYE NYLON SLING - SWC32021 >
3/4" X 180" EYE/EYE WIREROPE SLING-SWC8FAB879 >
2-1/2" X 1-1/4" BLACK REDUCER-FIT21/2X11/4BR >
IKO BHA1620ZOH Inch Series Caged Heavy Duty Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1 in Dia Bore, 1-5/16 in OD, 1 Row, 1-1/4 in W, 33200 N Dynamic/59600 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
3/8" Clear Braided Tube
