Steel Pipe Nipples
1-1/4 1-1/4"-mpt X 2-1/2" Galvanized
1-1/4"-MPT X 2-1/2" GALVANIZED NIPPLES-JPW11/4X21/2GN>
1-1/4"-MPT X 2" GALVANIZED NIPPLES-JPW11/4X2GN>
1-1/4"-MPT X 3-1/2" GALV/NIPPLE-JPW114X31/2GN>
1-1/4"-MPT X 4-1/2" BLACK NIPPLE-JPW11/4X41/2BN>
1-1/4"-MPT X 4" GALV/NIPPLES-JPW11/4X4GN>
1-1/4"-MPT X 5" BLACK NIPPLE-JPW11/4X5BN>
1-1/4"-MPT X 5" GALVANIZED NIPPLES-JPW11/4X5GN>
1-1/4"-MPT X 6" GALVANIZED NIPPLES-JPW11/4X6GN>
1-1/4"-MPT X 8" GALV/NIPPLE-JPW11/4X8GN>
1-1/4 1-1/4"-mpt X Close Galvanized
1-1/4"-MPT X CLOSE GALVANIZED NIPPLES-JPW11/4XCLGN>
1-1/4" -MALE PIPE THREADX10" BLACK NIPPLE-FIT11/4X10BN >
1-1/4" -MALE PIPE THREADX12" BLACK NIPPLE-FIT11/4X12BN >
1-1/4" X 12" SCHEDULE 80 BLACK NIPPLE-FIT11/4X12XHBN >
1-1/4" -MALE PIPE THREADX2-1/2" BLACK NIPPLE-FIT11/4X21/2BN >
1-1/4" X 2-1/2" SCHEDULE 80 BLACK NIPPLE-FIT11/4X21/2XHBN >
1-1/4" -MALE PIPE THREADX2" BLACK NIPPLE-FIT11/4X2BN >
1-1/4" -MALE PIPE THREADX2" BLACK NIPPLE-JPW11/4X2BN >
1-1/4" X 2" SCHEDULE 80 BLACK NIPPLE-FIT11/4X2XHBN >
1-1/4X3-1/2BN 1-1/4" -male Pipe Threadx3-1/2" Black
1-1/4" -MALE PIPE THREADX3-1/2" BLACK NIPPLE-JPW11/4X31/2BN >
1-1/4" -MALE PIPE THREADX3-1/2" BLACK NIPPLE-FIT11/4X31/2BN >
1-1/4" X 3-1/2" SCHEDULE 80 BLACK NIPPLE-FIT11/4X31/2XHBN >
1-1/4" -MALE PIPE THREADX3" BLACK NIPPLE-FIT11/4X3BN >
1-1/4" -MALE PIPE THREADX3" BLACK NIPPLE-JPW11/4X3BN >
1-1/4" X 3" SCHEDULE 80 BLACK NIPPLE-FIT11/4X3XHBN >
Recently Viewed
MORSE® 22374 1655M Chucking Reamer, 0.5118 in Dia x 8 in OAL, 0.4355 in Dia Straight Shank, Straight Flute
MORSE® 22374 1655M Chucking Reamer, 0.5118 in Dia x 8 in OAL, 0.4355 in Dia Straight Shank, Straight Flute
Linzer® 85055-0 8505 Closed Cell Paint Brush, 3 in W Foam Brush, Wood Handle
MORSE® 29862 1655H Chucking Reamer, 0.6865 in Dia, 9 in OAL, 0.5615 in Straight Shank, Straight Flute
MORSE® 29862 1655H Chucking Reamer, 0.6865 in Dia, 9 in OAL, 0.5615 in Straight Shank, Straight Flute
MORSE® 58854 5957 Ball Nose Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL, Bright
MORSE® 58854 5957 Ball Nose Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL, Bright
Dichtomatik N70129 O-Ring, 129 Dash Number, 1.549 in ID x 1.755 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BUTANE FUEL-JWH357633>
