Steel Pipe Nipples
3/8X2-1/2-BN 3/8" X 2-1/2" Black Nipples
3/8" X 2-1/2" BLACK NIPPLE-JPW3/8X21/2BN >
3/8" X 2-1/2" BLACK NIPPLE-FIT3/8X21/2BN >
3/8" X 12" SCHEDULE 80 BLACK NIPPLE-FIT3/8X12XHBN >
3/8" -MALE PIPE THREADX12" BLACK NIPPLE-FIT3/8X12BN >
3/8" -MALE PIPE THREADX10" BLACK NIPPLE-FIT3/8X10BN >
3/8" X 1-1/2" SCHEDULE 80 BLACK NIPPLE-FIT3/8X11/2XHBN >
3/8" -MALE PIPE THREADX1-1/2" BLACK NIPPLE-FIT3/8X11/2BN >
3/8X1-1/2 3/8" X 1-1/2" Galvanized Nipple
3/8" X 1-1/2" GALVANIZED NIPPLES
3/8X 3-GN, 3/8" X 3" Galvanized Nipple
3/8" X 3" GALVANIZED NIPPLE-JPW3/8X3GN>
3/8 X CL-GN, 3/8"-mpt X Close Galvanized
3/8"-MPT X CLOSE GALVANIZED NIPPLES-JPW3/8XCLGN>
3/8 X 8-GN, 3/8" X 8-gn Galvanized Pipe Nipple
3/8" X 8-GN GALVANIZED PIPE NIPPLE
3/8" X 8" BLACK PIPE NIPPLE-JPW3/8X8BN>
3/8 X 6, 3/8" X 6" Galvanized Nipple
3/8" X 6" GALVANIZED NIPPLE
3/8 X 5-GN, 3/8" X 5" Galvanized Nipple
3/8" X 5" GALVANIZED NIPPLE-JPW3/8X5GN>
3/8" X 5 BLACK NIPPLES-JPW38/8X5BN>
3/8 X 4-BN, 3/8"-mpt X 4" Metal Black Nipple
3/8"-MPT X 4" METAL BLACK NIPPLES-JPW3/8X4BN>
3/8 X 4-1/2-GN, 3/8"-mpt X 4-1/2 Black Nipple
3/8"-MPT X 4-1/2 BLACK NIPPLES-
3/8 X 3-1/2-GN, 3/8" X 3" Galvanized Nipple
3/8" X 3" GALVANIZED NIPPLE-JPW3/8X3-1/2GN>
3/8 X 2, 3/8" X 2" Galvanized Nipple
3/8" X 2" GALVANIZED NIPPLES-JPW3/8X2GN>
3/8" X 3' BLACK NIPPLE
3/8" X 2" BLACK NIPPLES-JPW3/8X2BN>
3/8 X 2-1/2-GN, 3/8" X 2-1/2" Galvanized Nipple
3/8" X 2-1/2" GALVANIZED NIPPLE
3/8 X 1-1/2-BN, 3/8" Mpt X 1-1/2" Black Nipple
3/8" MPT X 1-1/2" BLACK NIPPLES-JPW3/8X11/2BN>
3/4" X CLOSE SCHEDULE 80 BLACK NIPPLE-FIT3/4XCLXHBN >
Recently Viewed
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
1/2" SAE 4-PIECE LEFT HANDED FEMALE ROD ENDS-SEATRL8 >
7/8" -ID FLAT INSERT BEARING-FAFRA014NPP >
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Armstrong® 11-856 Crowfoot Wrench, 3/4 in Open End Wrench, 3/8 in Drive, 1.82 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-856 Crowfoot Wrench, 3/4 in Open End Wrench, 3/8 in Drive, 1.82 in OAL, ASME B107.21, Polished Chrome
FHP V-BELT (5-L-750)OUTSIDE CIRCUMFERENCE 75."-GAT3750 >
