Malleable Iron Pipe Fittings
FIT 1/8 X 3 X HBN 1/8 -MALE PIPE THREADX3 SCHEDULE 80 BLACK FITTING
1/8 -MALE PIPE THREADX3 SCHEDULE 80 BLACK NIPPLE
66-PC-5/32-2 5/32 Tube x 1/8" -female Pipe Thread Connector
5/32 TUBEX1/8" -FEMALE PIPE THREAD CONNECTOR
68-PC-5/32-2 5/32" X 1/8" -male Pipe Thread Push Connectors
5/32" X 1/8" -MALE PIPE THREAD PUSH CONNECTOR
68-PC-5/32-2-NP 5/32" Tube x 1/8" Male Pipe Thread Nickel Tees
5/32" TUBE X 1/8" MALE PIPE THREAD NICKEL PLATED
69-PSC-5/32-0 5/32" Tube x 10-32" Male Pipe Thread Swivel Elbow
5/32" TUBEX10-32" MALE PIPE THREAD SWIVEL ELBOW
Anvil® 0310000401 FIG 1101 Standard 90 deg Pipe Elbow, 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310000609 FIG 1101 Standard 90 deg Pipe Elbow, 3/8 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310000807 FIG 1101 Standard 90 deg Pipe Elbow, 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310001003 FIG 1101 Standard 90 deg Pipe Elbow, 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310001201 FIG 1101 Standard 90 deg Pipe Elbow, 1 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310016209 FIG 1103 Straight Street Elbow, 1/2 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310023809 FIG 1102 Standard 45 deg Pipe Elbow, 1 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310024203 FIG 1102 Standard 45 deg Pipe Elbow, 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310027404 FIG 1104 Street Elbow, 3/4 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310029400 FIG 1105 Straight Pipe Tee, 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310030804 FIG 1105 Straight Pipe Tee, 2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310085006 FIG 1125 Reducer, Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310085600 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 1/2 x 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310086806 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 1 x 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310088000 FIG 1125 Reducer, Coupling, 1-1/4 x 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310089008 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 2 x 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318900560 FIG 1124 Standard Pipe Cap, 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318901006 FIG 1124 Standard Pipe Cap, 4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318904083 Square Head Countersunk Pipe Plug, 3/8 in Nominal, MNPT End Style, 300 lb, Merchant Steel, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI. (6.9 bar).
Recently Viewed
ALAN 16TFFNBLU-16 AWG STRANDED COPPER TFFN/TWEN WIRE, BLUE UL LISTED. GAS & OIL RESISTANT
HIGH QUALITY CONDUCTOR 100% COPPER MADE WITH 16 AWG SOLID COPPER WIRE FOR OPTIMAL ELECTRICAL CONDUCTIVITY. TFFN INSULATION, FLEXIBLE AND DURABLE, SUITABLE FOR VARIOUS ELECTRICAL WIRING PROJECTS, INCLUDING APPLIANCE REPAIR, AUTOMOTIVE, AND INDUSTRIAL APPLICATIONS
-ALE16TFFNBLU >
ASST/COLOR HEATSHRINK TUBE KIT-MMMFP301KITASST >
98 Series Single Lens Design Rugged Polycarbonate Lens Spatula Temples Dielectric - Contains no metal parts The 98 Series features a contemporary wrap-around style. It provides increased angular coverage and improved peripheral vision. Molded-in brow guard and vented side shields give additional protection. Available in both hard coated for scratch resistance, uncoated for extra cost savings, and XL sizes for over-the-glass. These glasses are an excellent option for visitor glasses. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1 2025 standard.
1/2" DIAMETERX1-3/4" SHOULDER BOLT-HOL08078 >
IDLER BUSHINGWI375-1-0-PHOWI375 >
ERB® 19220 Americana® Full Brim Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, HDPE, 6-Point Woven Nylon Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Ratchet Adjustment
