Hydraulic Bulkhead Fittings
5-MJ X 5-MJ BULKHEAD HYD/ADAPTERS-DAY27005>
10-JIC BULKHEAD 90 HYD/ADAPTERS-DAY270110>
S/S 90-DEG BULKHEAD HYD/ADAPTERS
1/2" -NATIONAL PIPE THREAD LOCKNUTS-DAY30610 >
BULKHEAD LOCKNUTS-DAY3066 >
BULKHEAD LOCKNUTS-DAY3068 >
1" OFS BULK HEAD FITTING-DAYFS27001616>
HCI Preferred Supplier 270016 Bulkhead Union, 1-5/16-12 Nominal, Male JIC 37 deg Flare End Style, Sharpes Steel
HCI Preferred Supplier 270016 Bulkhead Union, 1-5/16-12 Nominal, Male JIC 37 deg Flare End Style, Sharpes Steel
HCI Preferred Supplier 27014 Bulkhead Union Elbow, 7/16-20 Nominal, 37 deg SAE JIC Flare, Steel
HCI Preferred Supplier 27014 Bulkhead Union Elbow, 7/16-20 Nominal, 37 deg SAE JIC Flare, Steel
HCI Preferred Supplier 27018 Bulkhead Union Elbow, 3/4-16 Nominal, 37 deg SAE JIC Flare, Steel
HCI Preferred Supplier 27018 Bulkhead Union Elbow, 3/4-16 Nominal, 37 deg SAE JIC Flare, Steel
Recently Viewed
Morse® 465702 TL Series Torque Limiter, 5/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J4 >
5 X 4 BUTT WELD REDUCER
Browning® 3693918 B5V® Type 3 Multiple Sheave, 1/2 to 1-15/16 in Split Taper Bore, 5.48 in OD, 2 Grooves, 5.3 in (5V)/5 in (A)/5-1/2 in (B) Dia Pitch, 1-23/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Champion CT7-1 Hole Cutter, 1 in Dia, 1 in D Cutting, Carbide Cutting Edge
1-7/16" NICKEL 2-BOLT FLANGE UNIT-BRWVF2S223NK >
