Paint Removers & Strippers
775398 DO-IT-BEST/SAVOGRAN STRYPEEZE QUART METHYLENE CHLORIDE FREE STRIPPER
GENERAL PURPOSE METHYLENE CHLORIDE FREE STRIPPER REMOVES PAINT, VARNISH AND MOST FINISHES WITHOUT HARMING WOOD, METAL OR MASONRY. SEMI-PASTE FOR BRUSH APPLICATION. EXCLUSIVE FORMULA IMPROVES CLING AND CUTTING POWER ON ROUNDED SURFACES. STAYS WET LONGER AND CUTS DEEPER. WATER RINSABLE FOR EASY CLEANUP.
-JWH775398>
PINT STRYPEEZE PAINT REMOVER-JWH775389 >
QUART OF PAINT BRUSH CLEANER-JWH775281 >
4-LB TRISODIUM PHOSPHATE CLEANER-JWH774246 >
1-LB TSP TRISODIUM PHOSPHATE CLEANER-JWH774237 >
1 QUART OF DAD'S EASY SPRAY PAINT REMOVER-JWH773794 >
1 GALLON OF DAD'S EASY SPRAY PAINT REMOVER-JWH773786 >
THE 4" WALL STRIPPER IS DESIGNED TO DELIVER MAXIMUM LEVERAGE ON WALL AND FLOOR SURFACES TO SAFELY AND EASILY REMOVE PAINTED OR UNPAINTED WALLPAPER, AS WELL AS PLASTIC OR FABRIC. THE INDUSTRIAL-GROUND CARBON STEEL 2-EDGE BLADES OFFER A DULL EDGE FOR SCRAPING FLOORS, GRILLS, OVENS, OR OTHER TOUGH SURFACES AND A SHARP EDGE FOR SCRAPING PAINT FROM GLASS, TILE, AND OTHER HARD SURFACES.
-JWH772845 >
LOW ODOR, ENVIRONMENTALLY FRIENDLY, 1 QUART. A COMPLETELY DIFFERENT AND BRAND-NEW TECHNOLOGY, GREEN ENVY IS WATER-BASED AND HAS SPECIAL SOLVENTS WITH EMUSIFYING AGENTS THAT MAKE IT COMPATIBLE WITH BOTH OIL-BASED AND LATEX PAINTS.
-JWH772037 >
1/2-PT JAPAN PAINT DRIER AN ADDITIVE FOR OIL-BASED PAINTS AND LINSEED OIL TO IMPROVE DRYING QUALITIES-JWH770485 >
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1" -MALE PIPE THREAD ELECTRICAL CHASE NIPPLE-ELEL703 >
SPIN-ON FUEL FILTERS-WIX33359>
PURE-50 EPOXY MIXING TIP-PWR08293>
HIGH TEMP BOND-LOC1232274 >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
