Marking Paints
Dottie® 246 Marking Paint, 20 oz Container, Fluorescent Red, 420 ft Coverage, 45 min Curing
Dottie® 246 Marking Paint, 20 oz Container, Fluorescent Red, 420 ft Coverage, 45 min Curing
Crown® by Aervoe® 7083 Marking Ink, 16 oz Container, White, 36 sq-ft/can Coverage, 72 hr Curing
Crown® by Aervoe® 7083 Marking Ink, 16 oz Container, White, 36 sq-ft/can Coverage, 72 hr Curing
Aervoe® 255 Construction Marking Paint, 20 oz Container, White, 548 Linear ft Coverage, 8 hr Curing
Aervoe® 255 Construction Marking Paint, 20 oz Container, White, 548 Linear ft Coverage, 8 hr Curing
Aervoe® 250 Construction Marking Paint, 20 oz Container, Fluorescent Blue, 548 Linear ft Coverage, 8 hr Curing
Aervoe® 250 Construction Marking Paint, 20 oz Container, Fluorescent Blue, 548 Linear ft Coverage, 8 hr Curing
Aervoe® 222 Survey Marking Paint, 20 oz, Fluorescent Orange, 740 Linear ft/Can, 8 hr Curing
Aervoe® Survey Marking Paint is the best marking paint of its kind. It is packaged so that is operated only in an upside down position. It provides exceptional quality in terms of initial color brightness, color retention, adhesion, durability and color consistency. It is formulated with superior quality raw materials to meet the requirements of the most demanding professional.
Recently Viewed
Bondhus® 3764 Extra Long Screwdriver, 5 mm BallDriver® Point, 370 mm OAL, Rubber Handle, ProGuard™
Bondhus® 3764 Extra Long Screwdriver, 5 mm BallDriver® Point, 370 mm OAL, Rubber Handle, ProGuard™
ITM C67NF0319 Bottom Tap, 3/8 in-24 NF Thread, H3 Thread Limit
3/16" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21008 >
Anvil® 0310016209 FIG 1103 Straight Street Elbow, 1/2 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
