The M.K. Morse Company
Morse® Real McCoy® TA10 Hole Saw, 5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® Real McCoy® TA11 Hole Saw, 11/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® Real McCoy® TA12 Hole Saw, 3/4 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® Real McCoy® TA14 Hole Saw, 7/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® TA15 Hole Saw, 15/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® AT14 Hole Saw, 7/8 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® AT16 Hole Saw, 1 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® AT18 Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® Real McCoy® TA19 Hole Saw, 1-3/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse CTR1208MC1 (405232), 12" x 8TPI, carbide tipped reciprocating saw blade is designed for metal and hard, abrasive cutting applications that traditional blades can't cut. Precision ground tooth profile optimizes performance in metal applications of 3/8" and thicker, as well as abrasive applications between 3/16" and 1/2". Heavy duty blade body provides rigidity under heavier feed pressure. One (1) blades per pack.
Morse® ATCG64 Hole Saw, 4 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® ZWEDC1014MAT-64-1/2" General Purpose Band Saw Blade, 64-1/2 in L, 1/2 in W x 0.025 in THK, 10/14 TPI, Bi-Metal Body
Morse® Real McCoy® TA40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® Matrix II ZWEG083C610MAT-156" Welded Band Saw Blade, 156 in L, 1 in W x 0.035 in THK, 6/10 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEG083C1014MAT-135" Welded Band Saw Blade, 135 in L, 1 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEG083C1014MAT-138" Welded Band Saw Blade, 138 in L, 1 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEFC1014MAT-138" Welded Band Saw Blade, 138 in L, 3/4 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® ZWEDR14MAT-64-1/2" General Purpose Band Saw Blade, 64-1/2 in L, 1/2 in W x 0.025 in THK, 14 TPI, Bi-Metal Body
Morse® Matrix II ZWEDC1014MAT-7 9-1/2" Welded Band Saw Blade, 7 ft 9-1/2 in L, 1/2 in W x 0.025 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEFR14MAT-93" Welded Band Saw Blade, 93 in L, 3/4 in W x 0.035 in THK, 14 TPI, Bi-Metal Blade, HSS Tooth
Morse® ATCG56 Hole Saw, 3-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® Matrix II ZWEDR06MAT-92" Welded Band Saw Blade, 92 in L, 1/2 in W x 0.025 in THK, 14 TPI, Bi-Metal Blade, HSS Tooth
Morse MA35PSN (139052), spring loaded arbor provides a 3/8" solid shank that can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
Recently Viewed
1/2" 2-PIECE RIGHT HAND FEMALE ROD ENDS-QAPCFR8 >
TAPERED ROLLER BEARING CONE-NTN07100S >
IKO BHA1818ZOH Inch Series Caged Heavy Duty Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/8 in Dia Bore, 1-1/2 in OD, 1 Row, 1-1/8 in W, 34900 N Dynamic/56600 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Apolloâ„¢ 94VLF10801A 94VLF-A 2-Piece Ball Valve, 2 in Nominal, Press End Style, Brass Body, Full Port, EPDM/PTFE Softgoods, Import
The Conbraco Internationalâ„¢ 94VLF-A Series Lead Free Two-Piece Press Ball Valve is ideal for installation in most plumbing and heating systems, including potable water.
SINGLE GROOVE A OR B-BELT 1" -ID SHEAVES
5-GRV BANDED B-225 V-BELT-GAT5/B225 >
