Stanley Black & Decker
Proto® J5214S Standard Length Socket, Imperial, 3/8 in Square Drive, 7/16 in
Proto® TorquePlus™ J3752 Flare Nut Combination Wrench, Imperial, 7/16 in Wrench, 6 Points, 15 deg Offset, 6-1/32 in OAL, Steel, Satin, ASME B107.100
Proto® J1214SPL Combination Wrench, Imperial, 7/16 in, 12 Points, 15 deg Offset, 6-29/32 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® J9214 Nut Driver, 7/16 in, Solid Round Shank, Fluted Handle, ANSI B107.12, ASME B107.110-2012, Federal GGG-W-657C, Polished Chrome
Proto® J3328 Short Open End Wrench, 7/16 in Wrench, Angled/Double Head, 4-7/16 in L, Alloy Steel, Satin, ASME B107.100
Proto® J5407A Standard Length Screwdriver Socket Bit, 1/2 in Drive, 7/16 in
Proto® TorquePlus™ J1171 Box End Wrench, 7/16 x 1/2 in Wrench, 12 Points, 15 deg Offset, 8-1/16 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1, ANSI B107.6, Federal GGG-W-636E
Proto® J3025B Open End Wrench, 7/16 x 1/2 in Wrench, Angled/Double Head, 6-7/16 in L, Alloy Steel, Black Oxide
Proto® TorquePlus™ J1725 Obstruction Box End Wrench, 7/16 x 1/2 in Wrench, 12 Points, 15 deg Offset, 5-3/4 in OAL, Half Moon Handle Bend, Steel, Polished Chrome/Satin, ASME B107.100, AS954E S3.8.1
Proto® J3025 Open End Wrench, 7/16 x 1/2 in Wrench, Angled/Double Head, 6-3/8 in L, Alloy Steel, Satin, ASME B107.100, ANSI B107.6, Federal GGG-W-636E
Proto® J3425 Extra Thin Open End Wrench, 7/16 x 1/2 in Wrench, Angled/Double Head, 10 in L, Alloy Steel, Satin
Proto® J94023 Full Threaded Shoulder Pattern Eye Bolt, 7/16-14, 1.38 in L Shank, Forged Steel, Plain
Proto® J7121 Extension Socket Adapter, Black Oxide, Hex x Male Square Drive, 7/16 x 1/2 in Male Drive, Male x Male Adapter, ANSI B107.1, Federal GGG-W-641E, Forged Steel
Proto® J7111 Extension Socket Adapter, Imperial, 7/16 x 3/8 in Male, 2-3/4 in OAL
Proto® J86A3/8S2 Cold Chisel, 7/16 in S2 Tool Steel, 5-9/16 in OAL, 7/16 in W Blade
Proto® J47707/32 Standard Length Socket Driver Bit, 1/4 in Drive, 7/32 in, 1 in L Bit
Proto® TorquePlus™ J4707LT Deep Length Socket, Imperial, 1/4 in Square Drive, 7/32 in
Proto® TorquePlus™ J4707T Standard Length Socket, Imperial, 1/4 in Square Drive, 7/32 in
Proto® J49907/32 Extra Long Socket Driver Bit, Imperial, 3/8 in, 7/32 in, 5 in L Bit, Federal GGG-W-641E
Proto® J49907/32XL Extra Long Socket Driver Bit, 3/8 in Drive, 7/32 in, 5 in L Bit
Proto® TorquePlus™ J4707L Deep Length Socket, Imperial, 1/4 in Square Drive, 7/32 in
Proto® TorquePlus™ J4707 Standard Length Socket, Imperial, 1/4 in Square Drive, 7/32 in
Proto® J1207EFS Open End Stubby Length Combination Wrench, 7/32 in, 6 Points, 15 deg Offset, 3-3/32 in OAL, Alloy Steel, Satin
Proto® J9207 Nut Driver, 7/32 in, Solid Round Shank, Brown Fluted Handle, ASME B107.110-2012, Polished Chrome
Recently Viewed
NIBCO 417-120 Elbow, 12 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
The NIBCO 417-120 is a 12-inch, 45-degree PVC Schedule 40 pressure elbow fitting used primarily in large-scale residential, commercial, and industrial water distribution systems.
TPR-ID SPHERICAL ROLLER BEARING-GUL22232K >
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-IDCBK0243/4 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB50K>
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA78K>
Charlotte PVC 02309 0800, 3/4 in nominal, Socket end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
