Reed Manufacturing
Reed Tools 2-4 4-WH 1/2"-2" STEEL PIPE CUTTER RPT 03335
REED offers a variety of pipe cutters, both with and without guides. Standard pipe cutters without guides feature strong malleable iron frames. These pipe cutters work on steel, stainless steel, galvanized steel or cast iron pipe, depending on the installed cutter wheels. (Models ship with cutter wheels for steel.) The wide rollers help create square cuts. REED's thin profile, sharp cutter wheels allow shorter handles for work in smaller spaces. These pipe cutters leave no burr, which is great for threading jobs. The 2-3 pipe cutter with three wheels (and no rollers) means more cutting surface and less handle swing.
Reed Tools 2-RBHD 2-1/2"-4" CUTTER WHEELS RPT 03613
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools 2-RBS PIPE CUTTER WHEELS RPT 03612
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools 2"-NPT 12-R HSS DIE HEADS RPT 05636
R12+ Dropheads ship completely assembled and ready to use with HSS segmental dies already in place. R12+ Dropheads can be used manually with the ratchet ring and handle or with REED's 700PD, 700APD and 701PD Power Drives. R12+ dropheads are interchangeable with RIDGID® 12-R dropheads and can also be utilized in the RIDGID® 700 power drive.
Reed Tools 2"-NPT 12-R HSS PIPE DIES RPT 05616
REED knows how to cut a good thread and high speed steel (HSS) R12+ Segmental Dies show this with cutting edges manufactured in-house by precision CNC machinery. The 1/2" through 2" die segments are available in NPT. The segmental die design enables smooth chip flow and easy cutting. R12+ die sets are replaceable parts for REED R12+ Dropheads, as well as the following RIDGID® dropheads: 12-R, 00-R, 111-R, 0-R, 11-R, 30A and 31A threaders. Segmental dies are sold in full sets of four.NOTE: Available only in right-hand configuration.
Reed Tools 24" RW-24 H/DUTY PIPE WRENCHES RPT 02170
REED Heavy-Duty Straight Pipe Wrenches are the most popular pipe wrench style. High-tensile ductile iron handle and hardened, alloy steel parts are designed to withstand the heaviest demands. New production tooling for the hook jaws produces sharper teeth on the 18, 24 and 36 in models. This change yields a still better grip for hard oil field pipe.
Reed Tools 3-RG RIDGID 3S,4S,44S CUTTER WHEEL RPT 03616
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools 3/4"-NPT 12-R HSS DIE HEADS RPT 05628
R12+ Dropheads ship completely assembled and ready to use with HSS segmental dies already in place. R12+ Dropheads can be used manually with the ratchet ring and handle or with REED's 700PD, 700APD and 701PD Power Drives. R12+ dropheads are interchangeable with RIDGID® 12-R dropheads and can also be utilized in the RIDGID® 700 power drive.
Reed Tools 3/4"-NPT 12-R HSS PIPE DIES RPT 05608
REED knows how to cut a good thread and high speed steel (HSS) R12+ Segmental Dies show this with cutting edges manufactured in-house by precision CNC machinery. The 1/2" through 2" die segments are available in NPT. The segmental die design enables smooth chip flow and easy cutting. R12+ die sets are replaceable parts for REED R12+ Dropheads, as well as the following RIDGID® dropheads: 12-R, 00-R, 111-R, 0-R, 11-R, 30A and 31A threaders. Segmental dies are sold in full sets of four.NOTE: Available only in right-hand configuration.
Reed Tools 32633 MC-1 MINI-CUTTER WHEELS RPT 03661
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools 345-T CUTTER WHEELS RPT 03666
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools 4-IN-1 THRU-BOLT RATCHET WRENCHES RPT 02690
REED's L4N1 and L4N1XP Thru-Bolt™ ratchet wrenches feature four sockets on one wrench in a popular dog bone configuration. The sockets are designed to stay on the handle, which means there are no loose sockets to misplace. The length and design of the handle provide maximum leverage. And, the rugged, textured handle grip ensures a secure hold for the operator. Use just one tool to work on mechanical joints and restraints, repair clamps, service saddles, gas/water couplings, flange bolts, friction clamps, hydrant break flanges and some bonnet bolts. Additionally, tightening nuts on long bolts or all-thread rod is never a problem with REED's Thru-Bolt™ sockets which work by letting the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length. Thru-bolt sockets replace the need for separate regular and deep sockets. L4N1XP provides superior performance and extra protection as the sealed ratchets keep out most debris and dirt. Regular tool cleaning and maintenance is recommended for both wrench models. These socket wrenches are made in USA.
Reed Tools 8" HEAVY DUTY PIPE WRENCHES RPT 02120
REED Heavy-Duty Straight Pipe Wrenches are the most popular pipe wrench style. High-tensile ductile iron handle and hardened, alloy steel parts are designed to withstand the heaviest demands. New production tooling for the hook jaws produces sharper teeth on the 18, 24 and 36 in models. This change yields a still better grip for hard oil field pipe.
Reed Tools CUTTER WHEEL PINS RPT 93200
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
Reed Tools F/STEEL RCS-8-36 CUTTER WHEELS RPT 03530
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools H-4 PIPE CUTTER WHEELS RPT 03504
All Reed cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
Reed Tools H-4-S 2"-4" HINGED PIPE CUTTERS RPT 03120
Hinged Pipe Cutters feature four wheels to cut steel, stainless steel, cast and ductile iron with only 90deg to 110deg handle swing. Only 4" (125 mm) clearance is required around pipe. Strong guide fingers ensure perfect wheel alignment for square cuts. A closed 360deg frame on the hinged pipe cutter forces all energy into cutting the pipe for maximum efficiency. There is no shower of sparks in this cold cut. REED has the only 4-wheel pipe cutter that tracks every time and the only one recommended for ductile iron, steel, and stainless steel to Schedule 100. This tool is a REED invention.
Reed Tools HS-8-12 HINGED STEEL CUTTER WHEEL RPT 03508
All Reed cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel.
Reed Tools MC-3 1/8"-1-1/8" MINI TUBE CUTTERS RPT 03495
For use in extremely tight places, mini tubing cutters require minimal swing around the tubing. Mini tubing cutters can be used on copper, steel, stainless steel and aluminum tubing. MC2GRIP has rounded corners and edges of the body for a more comfortable grip when rotating the cutter around tubing. After tightening the feed screw, mini tubing cutters work faster by providing a more consistent cutting force on the wheel.
Reed Tools O T10,T15,T20 CUTTER WHEELS RPT 03660
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools OSS T10,T15,T20 CUTTER WHEELS RPT 03655
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools R-1032-S CUTTER WHEELS RPT 03532
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Reed Tools T-10-SS 1/8" TO 1" TUBE CUTTERS RPT 03476
REED tubing cutters are equipped with special wheels for stainless steel. REED wheels for stainless tubing use specialized steel for toughness and heat dissipation, resulting in long wheel life. T10SS, T15SS and T20SS tubing cutters offer a large knob for firm grip and easy turning, along with an internal reamer in the knob. TC11SS telescoping tubing cutter includes a fold-out reamer and spare wheel for stainless tubing.
Reed Tools T-20 5/8" TO 2-1/8" TUBE CUTTERS RPT 03487
Tubing cutters are a simple, durable design. Each tubing cutter has a screw feed with a large grip knob to make it easier to tighten the cutter. T10 and T15 cutters are zinc alloy construction with a built-in reamer for convenient cutting and deburring. T20 cutter is larger but light due to its aluminum construction. T20 cutter features a fold-out reamer. Wide rollers on all three cutter models yield a square cut while thin cutter wheel profile ensures a quick, clean cut.
Recently Viewed
STR-ID SPHERICAL ROLLER BEARINGS-SNR22322>
Regal Beloit Corporation (Browning) SUPER GRIPBELT® 21/32" x 7/16", 43" Outside Circumference, 41.8" Pitch Length, Type B, V-Belt
Browning® Classical v-belts are designed to deliver maximum performance and service life. Classical belts feature single wrap design, which provides greater flexibility when using small diameter sheaves. Classical single wrap v-belts also have less fabric overlap, which reduces center distance variation and vibration.
Features & Benefits
Unique Design Enhances Performance and Provides Increased Horsepower Capacity in a Shorter Center Drive
Single Fabric Design Allows for the Belt to be More Flexible in Addition, it can Now be Used with Sub-Min Pitch Diameters Sheaves to Reduce Drive Cost
Reduced Overlap Provides Lower Vibration and Reduced Noise During Operation
High Strength, Synthetic Fiber Cords Carry the Horsepower Load and Minimize Stretching
Static Conducting
Specifications
Type: B
Outside Circumference: 43 Inch
Top Width: 21/32 Inch
Thickness: 7/16 Inch
Application: Aggregate and Cement, Agriculture, HVAC, Minerals and Mining, Oil and Gas, Pulp and Paper and Unit Handling
Pitch Length 41.8 Inch
Temperature Rating 140 Deg F
5-VX-1320/08 PIX BELTS
8-GROOVE BANDED 5-VX-1320 V-BELT - PIX5VX1320/08>
BELT LACING POWER PUNCH-COV11 >
V-BELTS-BRWB93>
Streamline® 05883, 4 in nominal, Spigot x Hub end style, SCH 40/STD, PVC, Domestic
Streamline® PVC DWV fittings are manufactured to exact specifications to ensure the best fit in the industry. Each fitting delivers excellent rigidity and smooth interior walls to improve flow, inhibit scaling and provide superior resistance to chemicals and corrosion. Our stringent quality control protocols guarantee that our fittings fit and perform flawlessly, piece after piece. All fittings are packaged in standard industry carton quantities and dimensions, and utilize an intuitive, easily interpreted style numbering system.
