Pearl Abrasive
2-1/2" X 1" 180-GRIT FLAPWHEEL-PEAFL212180 >
2-1/2" X 1" 120-GRIT FLAPWHEEL-PEAFL212120 >
18" X .125X1" DIAMOND BLADE-PEALW1812CP >
12X.125X1" STANDARD DIAMOND ASPHALT-PEALW1212AGS >
12" X .125" X 20-MM DIAMOND BLADE-PEALW1212CS2 >
12" X .125" X 1" DIAMOND BLADE - PEAPV1212XL >
1" X 3/4" X 1/4" 80-GRIT FLAPWHEEL-PEAFL13480 >
1" X 3/4" X 1/4" 60-GRIT FLAPWHEEL-PEAFL13460 >
1" X 3/4" X 1/4" 180-GRIT FLAPWHEEL-PEAFL134180 >
1" X 3/4" X 1/4" 120-GRIT FLAPWHEEL-PEAFL134120 >
1" X 1" X 1/4" 120-GRIT FLAPWHEEL-PEAFL110120 >
1-1/8" X 21" 60-GRIT SANDING BELT-PEACB11860 >
1-1/8" X 21" 40-GRIT SANDING BELT-PEACB11840 >
Recently Viewed
RACO® 1433 Unthreaded Conduit Combination Coupling, 3/4 in, For Use With IMC/Rigid to EMT Conduit, Steel, Electro-Plated Zinc
RACO® 1433 Unthreaded Conduit Combination Coupling, 3/4 in, For Use With IMC/Rigid to EMT Conduit, Steel, Electro-Plated Zinc
3"-DIAMETER X .035"-THICKNESS X 3/8"-ARBOR-HOLE TYPE-1 CUTOFF WHEEL/BLADE
3/4"-DIAMETER 320-GRIT FLEX HONE - BRCBC3/4320SC >
GP® 4042D Deep Length Socket, 1 in, 1-5/16 in Hex Socket, 6 Points
PIX A-34 IS A CLASSICAL V-BELT 36" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA34 >
MORSE® 31310 1266 Hex Rethreading Die, 1/2-20 UNF Thread, 1/2 in THK, Carbon Steel
