OHIO GASKET AND SHIM
STEEL SHIM STOCK-OHSCRS10 >
STEEL SHIM STOCK-OHSCRS12 >
BRASS SHIM STOCK-OHSCBS15 >
STEEL SHIM STOCK-OHSCRS25 >
BRASS SHIM STOCK-OHSCBS31 >
STEEL SHIM STOCK-OHSCRS31 >
9/16" X 12" ZINC SQUARE KEYSTOCK-OHSSK562 >
Recently Viewed
Crescent® LTLA1100-02 Torpedo Level, 9 in L, 3 Vials, Aluminum, 1 mm/m Accuracy
The new Crescent levels have been designed with large magnified vials for better visibility and sturdy aluminum housings to protect against damage if levels are dropped. Permanently embedded magnets attach to surfaces securely, allowing users to continue working without the level falling off. With their slim profile and compact design, these levels are perfect for various uses on-the-go.
Browning® 1077858 QD Bushing, 1-1/4 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning 15-TOOTH #60-1 CHAIN SPROCKETS BRW H-6015 X 1-3/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
N14-17B by Coilhose | Coiled Air Hose | 1/4" Hose ID | 1/4" Male NPT Thread | 2 Swivel Fittings | Yellow | Nylon | 17ft
Littelfuse® POWR-GARD® SLC010 Current Limiting Medium Acting Time Delay Fuse, 10 A, 600 V AC, 100 kA Interrupt, G Class, Cartridge Body
The unique design of Littelfuse® compact SLC series Class G fuses provide additional time delay over competitive products which increases system reliability. Compact Class G fuses were the first fuse series to approach midget fuse dimensions and meet NEC requirements for branch-circuit protection. The unique dimensions of SLC series Class G fuses prevents insertion of lower voltage fuses in Class G fuse holders. The fuse's varying length prevents insertion of higher ampere rated fuses in fuse holders designed for lower ampere ratings. Class CC fuses are replacing Class G fuses in many new designs. Class CC fuses' superior time delay plus higher voltage and interrupting ratings meet the needs of modern circuits. Littelfuse® introduction of POWR-PRO® CCMR series fuses, with ratings upto 60 A for providing branch circuit protection are accelerating this trend.
American Lock® aluminum padlock. 1-1/2 in (3.8cm) wide green anodized aluminum body, 1/4 in (6 mm) chrome plated, boron alloy shackle with 1-1/2 in (3.8cm) clearance. Anodized finish suitable for lockout in food processing facilities. Corrosive resistant finish for tough environments. High visibility color plus high security. Keyed different 5-pin tumbler rekeyable cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 24.
