Morse Cutting Tools
MORSE C/Tool 7/64" SML DRILLBITS MCT 15130
MORSE® 15130 1435 General Purpose Screw Machine Drill, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, HSS, Bright
MORSE C/Tool 7/64" SOLID-CARBIDE HELIX DRILLBIT MCT 51052
MORSE® 51052 5374 Standard Length Jobber Length Drill Bit, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE C/Tool 7/64" SPLIT POINT DRILLBITS MCT 14471
MORSE® 14471 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE C/Tool 7/64" TAPER-LENGTH HSS DRILLBITS MCT 10557
MORSE® 10557 1314 General Purpose Taper Length Drill, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 4-5/8 in OAL, HSS, Black Oxide
MORSE C/Tool 7/64" X 12" AIRCRAFT DRILLBITS MCT 16704
MORSE® 16704 1391 Aircraft Extension Drill, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 135 deg Point Angle, HSS
MORSE C/Tool 7/8" 2-FL DE CC HSS ENDMILL MCT 43429
MORSE® 43429 1896 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-9/16 in Length of Cut, 2 Flutes, 7/8 in Dia Shank, 5-1/2 in OAL, Bright
MORSE C/Tool 7/8" 2-FLUTE SE ENDMILLS MCT 43670
MORSE® 43670 1898 Center Cutting Regular Length Single End End Mill, 7/8 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 3-3/4 in OAL, Bright
MORSE C/Tool 7/8" 3-FL DE CC ENDMILLS MCT 42110
MORSE® 42110 1882 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE C/Tool 7/8" 4-FL DE ENDMILLS MCT 43284
MORSE® 43284 1895 Double End Non-Center Cutting Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE C/Tool 7/8" 4-FL HSS 82-DEG COUNTERSINK MCT 25558
MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
MORSE C/Tool 7/8" 4-FL SE CC 3/4"-SHANK ENDMILL MCT 96130
MORSE® 96130 4550G Center Cutting Regular Length Single End End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, TiN Coated
MORSE C/Tool 7/8" CARBIDE-TIP REAMERS MCT 56017
MORSE® 56017 5733 Expansion MORSE® Chucking Reamer, 7/8 in Dia x 10 in OAL, 3/4 in Dia Straight Shank, Straight Flute
MORSE C/Tool 7/8" CONSTRUCTION TAPER REAMERS MCT 21007
MORSE® 21007 1650 Tapered Construction Reamer, 7/8 in Dia x 7-1/4 in L, 1/2 in Dia 3-Flat Shank, Left Hand Helical Flute
MORSE C/Tool 7/8" CYLINDER SHAPE CARBIDE BURRS MCT 59891
MORSE® 59891 5970 Premium Machinist's File, End Cut End, Cylindrical Head, 7/8 in Dia Head, 1 in L of Cut, 2-5/8 in OAL, Double Cut
MORSE C/Tool 7/8" MULTIFLUTE ENDMILLS MCT 44144
MORSE® 44144 4550 Center Cutting Regular Length Single End End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 7/8 in Dia Shank, 4-1/8 in OAL, Bright
MORSE C/Tool 7/8" TAPER LENGTH DRILLBITS MCT 10606
MORSE® 10606 1314 General Purpose Taper Length Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 10 in OAL, HSS, Black Oxide
MORSE C/Tool 7/8" X 1/2"-SHANK S&D DRILLBITS MCT 19054
MORSE® 19054 1424S Silver & Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 7/8" X 1/2"-SHK MARXMAN DRILLBITS MCT 80068
MARXMAN™ 80068 424R Silver & Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 7/8" X 1/2"-SHK S&D DRILLBITS MCT 17054
MORSE® 17054 1424R Silver & Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 7/8" X 3/4"-SHK 3-FL CC ENDMILLS MCT 42062
MORSE® 42062 1880 Center Cutting Regular Length Single End End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, Bright
MORSE C/Tool 7/8"-14 SAE NF 4-FL BOTTOM TAPS MCT 32658
MORSE® 32658 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/8-14 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 7/8"-14 SAE NF 4-FL PLUG TAPS MCT 32478
MORSE® 32478 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/8-14 Thread, H4 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 7/8"-14 SAE NF B/T/P TAP SETS MCT 32720
MORSE® 32720 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
MORSE C/Tool 7/8"-14 SAE RETHREAD HEX DIES MCT 31320
MORSE® 31320 1266 Hex Rethreading Die, 7/8-14 UNF Thread, 7/8 in THK, Carbon Steel
Recently Viewed
15" X 6" X 5" YELLOW SHELF STORAGE BIN - AKR30234Y>
2.5-MM X 35-MM METRIC O-RINGS-CUS2.5MM X 35MM >
1-1/2" X 3-19/30X1" 2" HOLE RIGID PIPE STRAP - STEEL-APLCF150 >
Littelfuse® POWR-GARD® 1304R1C5.5W Current Limiting Single Barrel Medium Voltage Fuse With Hook Eye, 130 A, 5.5 kV AC, 80 kA Interrupt, Class: R, Cartridge Body
R-rated fuses provide required short circuit protection for medium voltage motors, motor controllers and associated circuitry. These components have limited ability to absorb the energy of large short circuit currents. Medium voltage motor controllers contain overload relays which provide both overload protection and locked rotor protection to the motor. The controllers are also intended to interrupt low value short circuits within the capability of the motor controller. This protects the medium voltage fuse from sustained over currents which are less than their minimum interrupting rating. NEMA standards for R-rated medium voltage power fuses require that they operate within 15 to 35 s when subjected to an RMS current 100 times the R-rating.
The Milwaukee® SDS plus bits with 1/4 in. hex are designed specifically for Tapcon® screw applications. Built to take on brick, block, and concrete Milwaukee SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate, and reduce Carbide chipping. To be used with drive sleeve available in the SDS-Plus Tapcon® installation kit (48-20-7497). Tapcon® is a registered trademark of Illinois tool works Inc.
3/8" X 6" ZINC-PLATED EYEBOLT-NTL123539 >
