Morse Cutting Tools
MORSE 3/8" 4-FL SE BALLNOSE CRB ENDMILL MCT 91160
MORSE® 91160 5942T Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiALN Coated
MORSE 3/8" 1-FL CRB 82-DEG COUNTERSINKS MCT 56108
MORSE® 56108 5752 Countersink, 3/8 in Dia Body, 1/4 in Dia Shank, 1 Flutes, 82 deg Included, Carbide
MORSE 3/4"-10 USS NC 4-FL HAND PLUG TAPS MCT 32469
MORSE® 32469 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE 1/4" 5-FL SE CARBIDE ENDMILL MCT 56290
variFLUTE™ 56290 5986 Center Cutting High Performance Single End Stub Length End Mill, 1/4 in Dia Cutter, 0.015 to 0.02 in Corner Radius, 3/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2 in OAL, AlTiN Coated
MORSE 1/2" SL-5 DBL/CUT CARBIDE BURRS MCT 59609
MORSE® 59609 5970 Premium Carbide Burr, Radius End, Taper Head, 5/8 in Dia Head, 1-3/16 in L of Cut, Double Cut
MORSE 1.0020 STRAIGHT SHANK HSS REAMER MCT 29929
MORSE® 29929 1655H Chucking Reamer, 1.002 in Dia x 10-1/2 in OAL, 0.874 in Dia Straight Shank, Straight Flute
MORSE #1 TAPER PIN REAMER HSS STR. FLUTE MCT 22588
MORSE® 22588 1680 Taper Pin Reamer, #1 Taper Pin, 0.1447 in Dia Small End, Straight Flute, Straight Shank
MARXMAN™ 83401 597 General Purpose Carbide Burr, Radius End, Tree Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
MARXMAN™ 83401 597 General Purpose Carbide Burr, Radius End, Tree Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
MARXMAN™ 80236 330 General Purpose Jobber Length Drill Bit, #36 Drill - Wire, 0.1065 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 80236 330 General Purpose Jobber Length Drill Bit, #36 Drill - Wire, 0.1065 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Bassett 5/8" 4F SE TINCOAT CARBIDE ENDMILL BAS B-90107
MORSE® 90732 5943G Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, TiN Coated
Bassett 3/4" 4F SE TINCOAT CARBIDE ENDMILL BAS B-90108
MORSE® 90734 5943G Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, TiN Coated
Recently Viewed
#32 DRILLBIT-REP300F32>
1-1/8"-ID 9-SCH COUPLING HALF-TBW9SCH11/8>
MORSE® 16717 1391 Aircraft Extension Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE® 98511 7501G General Purpose Spiral Point Tap, M12x1.75 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
1-3/8" GR-8 Split Lock Washers
Milwaukee® 48-20-4405 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
