Milwaukee Tool

SANDER 5/8"-11 DISC RETAINER NUTS-MWK49400350>

SANDER 1/2"-13 DISC RETAINER NUTS-MWK49400370>

SANDER DISC RETAINER NUTS-MWK49400380 >

SAWZALL RECIPROCATING SAW BLADE-MWK49221126 >

M-12 SCREWDRIVER/CLAMP METER COMBO KIT-MWK223923>

Ergonomic in-line design lets you dig and drill more comfortably. The SDS Max® demolition hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The in-line design offers more comfortable operation and the soft-grip side handle can be attached to the rear switch handle to minimize bending. Milwaukee® unique anti-vibration system provides added comfort by minimizing vibration. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control, a service reminder light and easy access for maintenance. You can position chisels more efficiently with the SDS Max® bit holder system. The tool uses standard SDS Max® hammer iron and comes with two auxiliary handles and a carrying case.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Break out the web between closely spaced drilled holes to make a large opening. This chisel is specifically designed for SDS Max® rotary hammers and should be used in hammer only mode.

1" ELECTRIC SDS ROTARY HAMMER-MWK536321 >

Milwaukee® Chisels are made from high grade, forged steel, providing up to 20% longer life. Floor scrapers have a flexible blade that allows for easy removal of flooring such as linoleum, laminate and carpeting. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer mode only. This is a replacement kit for the Milwaukee SDS Plus Floor Scraper (48-62-6046).

Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Milwaukee® 18 ga shear model 6850 features a swivel head that contains a center blade (48-44-0150), a left blade (48-44-0160) and a right blade (48-44-0170). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 in W.

Used with reciprocating saws. The shoe assembly attaches to the front of the saw and is used to press the saw against the material being cut.

SHOE ASSEMBLY - MWK45160645>

To prevent dust and dirt contamination, this cloth filter with a gasket (49-90-0260) covers a wire frame (49-90-0270) and surrounds the bottom of the motor head. The cloth filter can be removed from the frame for periodic cleaning. The 16 in. 49-90-0260 fits Milwaukee vacuum models 8911, 8912, 8925 and 8945.

SIDE HANDLE-MWK49150151>

SLIDING COMPOUND SAW KITS-MWK64976>

The 49-80-0308 slit nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 when intensified air flow is needed for lap welding PVC canvasses and sheets. (Must be used with 49-80-0305 air reduction nozzle.) includes nozzle only.

Drop forged of high grade steel, this hammer iron with heat treated work areas is used for slotting concrete, enlarging openings and web breaking between pre-drilled holes for demolition. One per package.

SNAP RING - MWK34601400>

Milwaukee® SHOCKWAVE™ Impact Duty™ insert socket adapters are engineered for extreme durability and upto 10X life. SHOCKWAVE™ Impact Duty™ insert socket adapters are made from proprietary steel and heat treated to control hardness.

SPANNER WRENCH-MWK49967205 >

Milwaukee® 44-20-0235 Spindle Lock Assembly, For Use With 6065/6065-6 Serial 752C 7 or 9 in 5000 rpm Sander