Milwaukee Tool

The MILWAUKEE® Shoulder Strap is for use with the M18 FUEL™ String Trimmer (2725-20) and the MILWAUKEE® M18 FUEL™ Power Head w/ QUIK-LOK™ (2825-20). The strap is padded and transfers the weight of the tool to the body, increasing comfort and reducing fatigue during extended use.

The MILWAUKEE® 10" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain is designed to provide controlled, low-vibration cuts. The chamfer chisel tooth shape means less re-sharpening vs a full-chisel cutter. The narrow kerf, LOW PROFILE™ cutters offer more cuts per charge versus standard kerf to help maximize battery efficiency. This chain is recommended for use with the M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ (2825-20PS), M18 FUEL™ QUIK-LOK™ 10" Pole Saw Attachment (49-16-2720), and 10" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar (48-09-5001) and fits saws & narrow kerf bars of the same pitch, gauge, length, and drive links.

The MILWAUKEE® 6" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain features a full house chain that delivers smooth pruning and clean finishes. The chain is designed for controlled, low-vibration cuts. The narrow kerf, LOW PROFILE™ cutters offer more cuts per charge versus standard kerf to help maximize battery efficiency. This chain is recommended for use with the M12 FUEL™ HATCHET™ 6” Pruning Saw (2527-20) and 6" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar (49-16-2733) and fits saws & narrow kerf bars of the same pitch, gauge, length, and drive links.

The MILWAUKEE® M18 FUEL™ QUIK-LOK™ Bristle Brush Attachment is powered by the MILWAUKEE® M18 FUEL™ Power Head w/ QUIK-LOK™ and is compatible with the split boom M18 FUEL™ QUIK-LOK™ Attachment System. This split shaft attachment's optimized bristle design is great for removing debris like mulch and dirt from hard surfaces and allows for longer life while covering a 23" clearing width. Milwaukee bristle brush's optimized guard design offers the best material containment. Milwaukee QUIK-LOK™ Attachments feature protected drive shafts for increased durability against drops and storage elements. The bristle brush attachment also features optimized gearing to manage the cordless MILWAUKEE® M18 FUEL™ Power Head RPM output specifically for this attachment.

The MILWAUKEE® 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar is made with lightweight material and is easy to maneuver for controlled cuts. The narrow kerf bar offers more cuts per charge versus standard kerf bars to help maximize battery efficiency. This bar is recommended for use with the M18 FUEL™ 14" Chainsaw (2727-20) and 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain (49-16-2749) and fits chainsaws with an A041 tail mount & narrow kerf chains of the same pitch, gauge, length, and drive links.

The Milwaukee® (49-16-2763) tool boot is for use with Milwaukee® M18™ fuel high torque impact wrenches, models (2762-20), (2763-20) and (2764-20) only. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

The Milwaukee 49-16-2767 tool boot is for use with the M18 FUEL™ high torque impact wrench (2767-20 & 2863-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

The MILWAUKEE® TRAPSNAKE™ 6 ft. Toilet Auger offers a breakthrough in protection, ease of use, and durability over every toilet auger that exists today. Milwaukee® toilet auger features several industry-firsts, including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism that holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. As part of the MILWAUKEE® TRAPSNAKE™ Porcelain Auger System, users can attach MILWAUKEE® TRAPSNAKE™ 6 ft. Toilet Auger to MILWAUKEE® M12™ TRAPSNAKE™ Driver, the first powered unit optimized for the challenges of porcelain fixtures. This Milwaukee® toilet snake delivers power and speed to work through tough clogs in tight traps but has optimized electronics that protect the fixture from the auger and allow the user to feel when engaged with a blockage.

Coring rig Dymo-Rig water hose, 8 in., 5/8 in. x 8 Ft, standard brass male and female hose fittings, includes water hose.

The 49-22-8108 extension kit is used with Milwaukee's 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage 18 in. on each end making the overall roller material carriage 8 ft. in length.

For materials up to 3/16 in. these Carbide tipped sheet metal cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. These cutters are designed to be used in hand held drills to achieve drill press quality holes. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.

Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. When you get tired of using a Stubby screwdriver you can either shell out the big bucks for a right angle drill or you can save your money and purchase Milwaukee's right angle attachment. Milwaukee Tool, one of the most respected names in the tool industry, manufactures a 1/4 in. hex right angle attachment that is ideal for cordless drills up to and including the more powerful 18 Volt models. The tool’s quick-change magnetic chuck accepts standard 1/4 in. hex drive accessories and the durable metal housing utilizes steel gears and ball bearing construction that gives the user a full 235-inch-pounds of torque.

The MILWAUKEE® M12™ Work Light outshines, outlasts and outperforms all other subcompact LED lights on the market. The LED light is 2X brighter than conventional incandescent bulbs and runs up to 2X longer on a single charge. The work light features a 90° rotating head to easily direct the light beam at the desired work areas, while its magnetic back enables hands-free use. The cordless battery powered work light has a sealed aluminum head that provides impact and weather resistance and is backed by a limited lifetime LED warranty, the LEDs never need to be replaced.

The MILWAUKEE® OPEN-LOK™ 1-3/8" HCS Wood Oscillating Multi-Tool Blades are made from premium high carbon steel with edge ground teeth for fast wood cutting. Designed for optimal cutting performance in wood, PVC, drywall, and other soft materials. The MILWAUKEE® HCS Wood blades feature more teeth and an increased 1-3/8" cutting width for a deeper plunge cut than previous generation wood blades. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.

The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Metal Oscillating Multi-Tool Blades are designed for metal cutting in screws, bolts, nails, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.

The MILWAUKEE® Hook & Loop attachment method of this 6” Backing Plate means that any Hook & Loop enabled polishing pad can be used with the backing plate, giving you a greater level of freedom in selecting your accessories. The Milwaukee 6” Backing Plate is designed for use with MILWAUKEE® M18 FUEL™ 15mm Random Orbital Polisher, but it has also been optimized for use with the M18 FUEL™ 21mm Random Orbital Polisher. The 6” Backing Plate can be interchanged between the two polishers as needed based on application requirements. The durable rubber design aids in the dispersion of heat in application which prolongs the life of the backing plate itself, saving our users both time and money.

For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6145 to a sander.

For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6140-6, 6148-6, 6149-6 and 6151 to a sander.

The Milwaukee® universal grinder dust shrouds work universally across most pro-brands, while competitors shrouds are proprietary to their own grinders. The Milwaukee® shrouds feature a durable and lightweight design with a convenient clear window for easy navigation. The purpose of grinder shrouds is to reduce exposure to dangerous debris, crystalline silica, and dust particles that can cause health issues for users who work with stone and concrete.

Heavy duty 1/3 H.P. Vacuum pump assembly complete with vacuum gauge, air filter, air hose and cord. Supplied as standard equipment (with models 4115-22 and 4120-22). Recommended only for use with 49-22-7100 single pad.

Replacement plunger rod for model 6560 and 6562 Milwaukee caulk gun when set up to use the quart size tube/carriage.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.