Milwaukee Tool
Milwaukee® 48-44-0150 Centered Shear Blade, For Use With 6850 and 6852-20 Model
Milwaukee® 18 ga shear model 6850 features a swivel head that contains a center blade (48-44-0150), a left blade (48-44-0160) and a right blade (48-44-0170). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 in W.
Milwaukee® 48-44-0151 Center Shear Blade, For Use With Model 6850 18 ga Shear, 18 ga
Milwaukee's 18 ga. Shear model 6850 features a swivel head that contains a center blade (48-44-0151), a left blade (48-44-0161) and a right blade (48-44-0171). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 inch wide.
Milwaukee® 48-44-0160 Left Shear Blade, For Use With 6850 and 6852-20 Model, 18 ga Capacity
Milwaukee® 18 ga shear model 6850 features a swivel head that contains a center blade (48-44-0150), a left blade (48-44-0160) and a right blade (48-44-0170). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 in W.
Milwaukee® 48-44-0170 Right Shear Blade, For Use With 6850 and 6852-20 Model, 18 ga Capacity
Milwaukee® 18 ga shear model 6850 features a swivel head that contains a center blade (48-44-0150), a left blade (48-44-0160) and a right blade (48-44-0170). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 in W.
Milwaukee® 48-44-0260 Replacement Shear Punch, For Use With 6890 16 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.
Milwaukee® 48-44-0265 Replacement Shear Punch, For Use With 6880 10 ga Nibbler, NEMA 1-15P
This item is the replacement punch for Milwaukee's 10 gauge nibbler model 6880.
Milwaukee® 48-44-0270 Shear Die, For Use With 6890 16 ga Nibbler, 16 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 16 gauge nibbler model 6890. The replacement punch, 48-44-0260, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the die.
Milwaukee® 48-44-0272 M12 FUEL Nibbler Punch Tool Kit, For Use With 16-Gauge Nibbler Bare Tool
The MILWAUKEE® M12 FUEL Punch and Die Set is to be used with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. The accessory punch and die is the portion of the tool that performs the cutting functionality and must be routinely replaced. This accessory is good for cutting thin sheet metal and corrugated materials.
Milwaukee® 48-44-0275 Replacement Shear Die, For Use With 6880 10 ga Nibbler, 10 AWG Capacity, NEMA 1-15P
This item is the replacement die for Milwaukee's 10 gauge nibbler model 6880. The replacement punch, 48-44-0265, is purchased separately. Must be used with allen wrench 49-96-0350 to remove the punch or die.
Milwaukee® 48-53-2684 Cordless C-Cutter Attachment, 1 in, Steel, For Use With Coupling Cables with RUST GUARD™
The MILWAUKEE® 1" C-CUTTER Attachment w/ RUST GUARD™ Plating sets a new standard in the market for rust protection, maneuverability, and durability, delivering up to 3X longer life. Traditional cables and attachments will oxidize, causing fragments of steel to erode off, damaging the structural integrity. Through a proprietary plating process, RUST GUARD™ delivers 20x more rust resistance, protecting against metal fatigue. This head atachment works with Milwaukee 3/8" and 1/2" inner core cables and 5/8" open wind cables.
Milwaukee® 48-59-1809 Rapid Charger, Li-Ion Battery, (2) Batteries, For Use With Li-Ion Batteries
With its fast charging and PACKOUT™ compatibility, the MILWAUKEE® M18™ Six Bay Rapid Charger delivers users reduced downtime and unmatched portability when charging. The Six Bay RAPID Charger simultaneously charges two batteries at a rapid charge rate, then automatically moves to the next two so you spend less time swapping batteries on the jobsite. The rapid charge rate is up to 40% faster than Milwaukee's standard rate chargers, reducing battery downtime. This battery charger is optimized for transportation and storage on and off the jobsite. Integrate this charger into your PACKOUT™ modular storage system, and experience unmatched charging portability. Bring this charger with you, either on your PACKOUT™ stack or by utilizing the convenient carrying handle. The Milwaukee® M18™ Six Bay Rapid Charger w/ PACKOUT™ Compatibility includes (1) USB-C port, allowing users to charge small personal electronics such as phones, tablets, and headlights. During charging, store your personal electronics on either side of the charger with storage caddies. The M18™ Six Bay Rapid Charger w/ PACKOUT™ Compatibility is great for users managing multiple M18™ battery packs throughout their day.
Milwaukee® 48-59-1812 Slide Multi-Voltage Charger, For Use With M12™ 48-11-2401, M18™ 48-11-1815 and 48-11-1828 Battery Pack, Li-Ion Battery, 1 hr Charging
The M18â„¢ and M12â„¢ multi-voltage charger accepts all M18â„¢ and M12â„¢ batteries, minimizing the need for extra chargers on the jobsite. This Combo charger requires less time to manage charge cycles, by sequentially charging the battery packs.
Milwaukee® 48-59-1815 M18™ Dual Bay Super Charger, For Use With M18™ Batteries, Li-Ion Battery
The MILWAUKEE® M18™ Dual Bay Simultaneous Super Charger delivers up to 6X faster charging to 80%, maximizing productivity by reducing downtime throughout the day. In just 35 minutes, users can charge an M18™ REDLITHIUM™ FORGE™ XC8.0 or FORGE™ HD12.0 Battery to 80%, allowing users to get back to work faster than ever before. Super Chargers are Milwaukee’s fastest chargers, providing you with the fastest charge times for all of your M18™ REDLITHIUM™ batteries. The M18™ Dual Bay Simultaneous Super Charger is COOL-CYCLE™ Capable. COOL-CYCLE™ Active Cooling System provides high-speed cooling for less downtime. The active cooling feature works with M18™ batteries that have COOL-CYCLE™ capability. This Super Charger is capable of simultaneously charging up to 2 batteries by leveraging CHARGE ADAPT™ Adaptive Charge Distribution to distribute power between bays for maximized productivity. The charger features REDLINK™ Intelligence and communicates directly with your battery to monitor cell voltage, temperature, and charge status to optimize the performance and maximize the life of the pack. This charger is compatible with all M18™ Batteries.
Milwaukee® 48-59-1880 Starter Kit, For Use With M18™ 18 V Cordless Tools, 8 Ah, XC™ Lithium-Ion Battery, 120 V AC
The M18 REDLITHIUMâ„¢ HIGH OUTPUTâ„¢ XC8.0 battery pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUMâ„¢ XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUMâ„¢ HIGH OUTPUTâ„¢ XC8.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM high output XC8.0 battery is fully compatible with all 175+ M18 solutions.
Milwaukee® 48-59-1890 Cordless Battery Charger, For Use With M18™ Cordless Power Tool, Li-Ion Battery, 60 min Charging, 1 Battery
The M18â„¢ REDLITHIUMâ„¢ HIGH DEMANDâ„¢ 9.0 battery pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18 V lithium-ion batteries. The battery is best optimized for high draw products and sustained run-time applications, and it provides the next, large step towards full corded replacement when paired with the M18 system of solutions. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18â„¢ REDLITHIUMâ„¢ HIGH DEMANDâ„¢ 9.0 battery is fully compatible with 100+ M18â„¢ tools.
Milwaukee® 48-59-2401 Battery Charger, For Use With M12™ Battery, Li-Ion Battery, 1 hr Charging, 1 Battery
Quickly charges all MILWAUKEE® M12™ batteries. Power up your M12™ REDLITHIUM™ and M12™ Lithium-Ion batteries in less than an hour with the MILWAUKEE® M12™ Lithium-Ion Charger. It communicates directly with the battery pack to manage charges and features an easy-to-load design. The charger’s slim profile requires little bench-top room. Monitor battery charges for all of your MILWAUKEE® M12™ cordless tools with the onboard indicator light.
Milwaukee® 48-59-2819 Charger, For Use With V28™ and M28™ Battery, Li-Ion Battery, 1 hr Charging, 1 Battery
Power up V28™ and M28™ lithium-ion batteries in less than one hour. Milwaukee's 28 Volt charger quickly charges V28 and M28 lithium-ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit’s pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.
Milwaukee® 48-62-1915 Floor Scraper Replacement Kit, 4 x 4 in Drill Bit, SDS Plus® Adapter Shank, For Use With 48-62-6046 SDS Plus® Floor Scraper and SDS Plus® Rotary Hammers
Milwaukee® Chisels are made from high grade, forged steel, providing up to 20% longer life. Floor scrapers have a flexible blade that allows for easy removal of flooring such as linoleum, laminate and carpeting. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer mode only. This is a replacement kit for the Milwaukee SDS Plus Floor Scraper (48-62-6046).
Milwaukee® 48-62-2000 Bull Point Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package.
Milwaukee® 48-62-2020 Flat Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1 in W Blade, 12 in OAL
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round Hex, 3/4 Hex, and 1-1/8 collared Hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round Hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.
Milwaukee® 48-62-2030 Flat Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1 in W Blade, 18 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-2040 Scaling Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1-1/2 in W Blade, 12 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-2046 Ground Rod Driver, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 10 in OAL, 3/4 in Hex, 21/32 in Round Shank, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Drop forged of high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed. One per package.
Milwaukee® 48-62-2050 Scaling Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 2 in W Blade, 12 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.
Recently Viewed
PIX AX-33 IS A COGGED, CLASSICAL V-BELT, 35" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS 1 RIB
A COGGED VERSION OF THE STANDARD "A" BELT. THE COGGED VERSION ALLOW THE USE OF A SMALLER DIAMETER PULLEY. ENHANCED HEAT AND OIL RESISTANCE, SUPERIOR FLEXIBILITY AND STRENGTH, ANTI-STATIC DESIGN FOR SAFETY, DURABLE FABRIC COVER LAYER, CUSHION RUBBER MATRIX FOR RELIABILITY.
-PIXAX33 >
8-MM-PITCHX1200-MM TIMING BELT-JAS12008M20 >
X L-PITCHX21" TIMING BELT-JAS210XL062 >
1-7/8" ID NEEDLE BEARINGS-KOYB3016>
5-MM-PITCH X 615-MM X 10-MM TIMING BELT - JAS6155M10>
8-MM-PITCHX600-MM TIMING BELT-JAS6008M16 >
