Klein Tools
640-5/16 KLEIN TOOLS 5/16-Inch Coated Nut Driver, 3-Inch Hollow Shaft
Entire shank plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping and thin coating permits use in confined areas
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Made in USA
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
D2036-6-SC-PC KLEIN TOOLS Needle-Nose Side-Cutting Pliers, 6-Inch
Extra length for added reach in confined areas.
Knurled jaws for sure wrapping and looping.
Spring-loaded for self-opening action.
Curved handles provide greater tool control.
KLE 1" X 25' MAGNETIC-TIP TAPE MEASURE KLE 918-25-RE
25ft 2-Sided Blade Power Return Rule, Magnetic Dual End Hook, 1" Tape
KLE 1/4"-SLOT 4"-SQ/SHANK SCREWDRIVERS KLE BD-284
Screwdriver has oversized handle that is 35-percent larger than comparable screwdriver handles and delivers up to 50-Percent extra power to perform tough jobs with minimum effort
Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Made in USA
Nickel-chrome, precision-forged and polished blades with black tips
Meets or exceeds applicable ASME / ANSI specifications
Klein 2-BLADE SHEEP-FOOT POCKET KNIVES KLE 1550-7
Klein® 1550-7 2-Blade Pocket Knife, Carbon Steel Screwdriver Tip/Sheepfoot Blade, 2-1/2 in, 2-3/8 in L Blade, Lock Opening
Klein 5-1/2" DIAG-CUT TAPERED NOSE PLIER KLE D-202-5
Klein® D202-5 Standard Diagonal Cutting Plier, 3/4 in L x 31/32 in W Tool Steel Short Jaw, 6 in OAL
Klein 5-METER POWER TAPE MEASURES/RULES KLE 926-5-ME
5-METER POWER TAPE MEASURES/RULES-
KLEIN 646-5/16-INS 5/16-Inch Insulated Nut Driver with 6-Inch Shank
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
Made in USA
Tip-Ident quickly identifies nut driver size
Cushion-Gripâ„¢ handles for greater torque and comfort
Klein 8" HI-LEV DIAGONAL CUTTING PLIERS KLE D-248-8
These high-leverage Diagonal-Cutting pliers for non Ferrous wire and soft metal cutting provide 36-Percent greater cutting power than other pliers. The angled head design makes work easier in confined spaces. The hot-riveted joint ensures smooth action with no handle wobble.
Klein 9" HI-LEV DIAGONAL CUTTING PLIERS KLE D-248-9-ST
These diagonal-cutting pliers were designed for rebar work, and are popular with Ironworkers. The 13 degree angled head makes it easier to work in confined spaces while the hooked handle improves the grip and reduces slippage. The high-leverage design has 36-Percent more cutting power. A hot-riveted joint ensures smooth action and no wobble in the handle. This pair will be your go-to tool when working with soft annealed rebar tie wire.
Klein Tools .060"-.25" FORGED CABLE HAVEN GRIP KLE 1604-10
Klein Tools' 1604 Series Messenger and Guy Strand Haven's® Grips are designed for use when a light, compact grip is desired, and where cable deformation is not a factor. They are recommended for use with steel strand cables. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Klein Tools .125"-.50" FORGED CABLE HAVEN GRIP KLE 1604-20
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability
Klein Tools .28"-75F FORGED CABLE HAVEN GRIPS KLE 1625-20
The Klein Tools 1625 Series Wire Rope Haven's® Grips are designed for use when a light, compact grip is desired and where cable deformation is not a factor. This grip also comes with a swing latch to help hold cable in the jaw. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Klein Tools .50-.75 WIRE PULLER CHICAGO GRIPS KLE 1628-17
Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick
Klein Tools "14-IN-1" BIT-HOLDING SCREWDRIVERS KLE 32303
Klein Tools' Adjustable Length Screwdrivers function both as multi-bit screwdrivers and impact driver attachments. With these screwdrivers, there is no need to run back to your tool bag. Industrial-strength bits are conveniently housed in the handle. Simply adjust the length of the blades to allow for easier access or remove to use with an impact driver. Powerful rare earth magnets secure bits and fasteners while the Cushion-Gripâ„¢ handle provides outstanding comfort and control.
Klein Tools "14-IN-1" HVAC SCREWDRIVER W/FLIP KLE 32304
The 14-in-1 HVAC Adjustable-Length Screwdriver features the most commonly used HVAC driver bits and nut drivers in one tool. Use as a screwdriver or as an impact driver attachment. Flip socket on end of blade has three positions for multiple functions. Great for tight spaces, impact driving and long reach applications.
Klein Tools "15-IN-1" RATCHETING SCREWDRIVERS KLE 32305
Klein Tools' Multi-Bit Screwdrivers help make your job a little easier. The 15-in-1 Ratcheting Screwdriver's durable ratcheting mechanism allows for faster and easier all-day driving. With the on-board storage of 14 common bits and a 1/4-Inch nut driver, this is your new everyday screwdriver. This screwdriver features industrial-strength bits as well as Cushion-Gripâ„¢ handles for outstanding comfort and control.
Klein Tools #0-PHILLIPS 2"-RD/SHK SCREWDRIVERS KLE P-12
Proudly made for professionals by Klein Tools. This #0 Phillips-tip pocket clip screwdriver features nickel-chrome, precision-forged and polished blades with black tips. The smooth Comfordome handle to fits comfortably in the palm of your hand.
Klein Tools #0-PHILLIPS 3"-RD/SHK SCREWDRIVERS KLE 604-3
The Klein Tools 3-Inch (76.2 mm) Phillips-Tip Screwdriver features a durable black tip that is precision-forged and ground with square edges to fit screw openings securely. Its shaft will not bond or twist in normal use due to integral flanges that provide an extra-strong, torque-proof anchor in the handle. This screwdriver is made of high-quality tempered steel.
Klein Tools #1 LEATHER BOTTOM CANVAS BUCKETS KLE 5104
The Klein leather-bottom tool bucket is made of heavy-duty canvas to withstand harsh job sites. A strong reinforced web strap extends down the side for extra weight capacity. Load rated for 100-pound (45.4 kg).
Klein Tools #1 LEATHER BOTTOM CANVAS BUCKETS KLE 5104-S
The Klein Tools Leather-Bottom Tool Bucket is made of heavy-duty No. 4 canvas. The leather reinforced bottom and web handle extending down the sides make it load rated for up to 100-pounds. On the interior is an 8 x 8-Inch pocket for additional storage.
Klein Tools #1 PH X 1/4 SLOTTED S/DRIVER BITS KLE 32398
Klein® 32398 Double End Reversible Screwdriver Bit, #1, 1/4 in, Phillips®/Slotted Tip
Klein Tools #1 SQ-RECESS 8"-RD-SHK SCREWDRIVER KLE 665
The Klein Tools #1 Square-Recess Tip Screwdriver has an 8-Inch Round-Shank for work on combination head receptacles, switch and panel screws. The Cushion-Gripâ„¢ handle allows for greater torque and comfort. Patented Tip-Ident quickly identifies the type of screwdriver and screwdriver tip orientation.
Klein Tools #1 SQUARE-RECESS SCREWDRIVERS KLE 661
The Klein Tools #1 Square-Recess Tip Screwdriver has a 4-Inch Round-Shank for work on combination head receptacles, switch and panel screws. The Cushion-Gripâ„¢ handle allows for greater torque and comfort. Patented Tip-Ident quickly identifies the type of screwdriver and screwdriver tip orientation.
Recently Viewed
Amperage Rating: 50 Amp Voltage Rating: 0–30 VDC / 120 VAC (Type I automatic reset) Design: Ignition-protected and weather-sealed for marine, heavy vehicle, and battery charger applications Terminals: Standard screw or 1/4"-28 stud style terminals
