IKO International
IKO Bearings 12-MM-ID NEEDLE BEARINGS IKO TAF-121916
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
IKO Bearings 12-MM-ID 16-MM-OD NEEDLE BEARINGS IKO TLA-1212-Z
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 12-MM-ID 16-MM-OD NEEDLE BEARINGS IKO TLA-1210-Z
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 12-MM 1.75 R/HAND FEMALE ROD ENDS IKO PHS-12-A
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
IKO Bearings 12-MM 1.75 L/HAND FEMALE ROD ENDS IKO PHS-12-L-A
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
IKO Bearings 11/16"-ID NEEDLE BEARINGS IKO BHA-1112-Z-OH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 11/16"-ID NEEDLE BEARINGS IKO BHA-1110-Z-OH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 11/16"-ID NEEDLE BEARINGS IKO BAM-1112
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 11/16"-ID NEEDLE BEARINGS IKO BAM-1110
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 10-MM-OD NEEDLE BEARINGS IKO TLA-1015-Z
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 10-MM-ID NEEDLE BEARINGS WITH RACE IKO NA-4900-UU
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
IKO Bearings 10-MM-ID NEEDLE BEARINGS IKO TLA-1012-Z
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 10-MM-ID NEEDLE BEARINGS IKO TLA-1010-Z
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 10-MM-ID NEEDLE BEARINGS IKO TAF-101716
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
IKO Bearings 10-MM-ID NEEDLE BEARINGS IKO TAF-101712
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
IKO Bearings 10-MM-ID BALL/NEEDLE BEARINGS IKO NAX-10-23-Z
IKO manufactures an economical series of Combined Needle Roller Bearings, comprised of both radial and thrust bearings. Caged needle roller bearings act as radial bearings, while thrust ball or roller bearings serve as thrust bearings. This series is available in four styles, including designs that incorporate thrust ball bearings, thrust roller bearings, angular contact ball bearings or three-point contact ball bearings. Applications include machine tools, textile equipment and industrial machinery. Needle roller bearings with thrust ball bearings are designed to handle thrust loads across a wide range of applications.
IKO Bearings 1/4"-ID NEEDLE BEARINGS IKO BAM-47
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 1/4" LINEAR BALL BUSHING IKO LBB-4
IKO LBB4 Inch Series Standard Linear Bushing, 1/4 in Dia Shaft, 1/2 in OD, 3/4 in L
IKO Bearings 1/2"-OD STUD TYPE CAM FOLLOWERS IKO CR-8-UU
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
IKO Bearings 1/2"-OD STUD TYPE CAM FOLLOWERS IKO CR-8-1-UU
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
IKO Bearings 1/2"-ID X 3/4"-OD NEEDLE BEARINGS IKO BHA-87-Z-OH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 1/2"-ID X 3/4"-OD NEEDLE BEARINGS IKO BHA-812-ZOH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 1/2"-ID X 3/4"-OD NEEDLE BEARINGS IKO BHA-810-ZOH
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO Bearings 1/2"-ID NEEDLE BEARINGS IKO BAM-88
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Recently Viewed
The M18â„¢ FUELâ„¢ 4-1/2 in. to 6 in. braking grinder is Milwaukee's most powerful small angle grinder to date, with a high performance brushless motor that generates 13 A corded power. The POWERSTATEâ„¢ brushless motor delivers 9,000 RPM, giving the tool the power needed to exceed performance expectations in all applications, as well as longer motor life, providing lower cost of ownership compared to brushed motors. Integrated Rapid Stopâ„¢ braking technology stops all accessories in 3 seconds or less, creating a safer user experience. By offering a full 6 in. capacity, users can feel confident replacing their corded tools with the M18â„¢ FUELâ„¢ 4-1/2 in. to 6 in. braking grinder. The power and runtime delivered by the M18â„¢ 6.0 high output batteries provides the user with more material removed per charge, making users more productive and efficient on the jobsite. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. Grinding wheel sold separately.
The 2862 M18â„¢ FUELâ„¢ with ONE-KEYâ„¢ high torque 1/2 in impact wrench with pin detent provides the most powerful, most compact and the most repeatable impact wrench in the industry. The POWERSTATEâ„¢ brushless motor delivers up to 750 ft-lb of fastening torque and 1100 ft-lb of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industryâ„¢ most compact cordless high torque impact wrench at 8.1 in length, this tool allows for more access in tight spaces. REDLINKâ„¢ Plusâ„¢ intelligence prevents damage to the tool and Battery due to overloading or overheating. REDLITHIUMâ„¢ batteries deliver more work per charge and more work over the life of the battery. Compatible with ONE-KEYâ„¢, this is the industryâ„¢ first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a toolâ„¢ performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials or have complete control over output speed and power for the specific application at hand. With ONE-KEYâ„¢, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The toolâ„¢ memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
NIBCO 77-102-01 2-Piece Ball Valve, 3/8 in Nominal, FNPT End Style, Bronze Body, Full Port, RPTFE Softgoods, Domestic
Designed for easy actuator mounting or panel mounting where highest Cv values are desired. RPTFE seats and stuffing box ring. Also available with 250 lb steam trim option.
MORSE® 38107 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
Charlotte PVC 02101 0800, 3/4 in nominal, Socket x FNPT end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
3-VX-450/09 PIX BELTS
9-GRV BANDED 3-VX-450 V-BELT-PIX3VX450/09>
