HCI PREFERRED SUPPLIER

SOCKET WELD ELBOW

3/4" 3000 LB SOCKET WELD ELBOW-FIT3/4SWE3000 >

3/4" X 1/2" 3000 LB BLACK REDUCER-FIT3/4X1/2BR3000 >

3/4" SCH-80 BLACK 45-DEGREE ELBOW

3/4" SCHEDULE 80 45-D BLACK ELBOW-FIT3/4XHB45 >

3/5"-FPT SCH-80 BLACK COUPLING-JPW34XHBC>

1/2"-FPT SCH-80 90-DEG BLACK ELBOW-JPW1/2XHBE>

3/4" SCHEDULE 80; BLACK 90 D STREET ELBOW-FIT3/4XHBSTE >

3/4" SCHEDULE-80 90-DEGREE BLACK STREET ELBOW - JPW3/4XHBSTE>

3/4"-FPT SCH-80 METAL BLACK TEES-JPW3/4XHBT>

3/4" -FEMALE PIPE THREAD SCHEDULE 80 BLACK COUPLING-FIT3/4XHBC >

3/4" -FEMALE PIPE THREAD SCHEDULE 80 BLACK CAP-FIT3/4XHBCA >

3/4" SCHEDULE 80; 90 DEGREE BLACK ELBOW-FIT3/4XHBE >

3/4" SCH-80 PLAIN END BLACK PIPE (FT)-JPW3/4XHBPE >

3/4" -FEMALE PIPE THREAD SCHEDULE 80 METAL BLACK TEE-FIT3/4XHBT >

3/4" -FEMALE PIPE THREAD SCHEDULE 80 BLACK UNIONS-FIT3/4XHBU >

3/4" SCH-80 BLACK UNION-JPW3/4XHBU >

3/4" SCHEDULE 80 THREADED FLANGES-FIT3/4XHBWFTHR >

3/4" SCHEDULE 80 SLIP-ON FLANGES-FIT3/4XHBWFSLIP >

THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY

CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.

A RESILIENT METAL ITEM, CIRCULAR OR NEARLY CIRCULAR, WHICH IS DESIGNED TO BE INSERTED INTO AN INTERNAL OR EXTERNAL GROOVE AND RETAINED BY ITS OWN SPRING ACTION, OR IT MAY HAVE EXTERNAL PRONGS OR PROJECTIONS DESSIGNED TO BE INSERTED NTO A HOLE AND RETAINED BY SPRING ACTION OF THE PRONGS WHICH GRIP BY IMBEDDING INTO THE MATERIAL.

RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS

3/4" -ID JAW COUPLING HALVES