HCI PREFERRED SUPPLIER
1 X 3/4-BE, 1"-fpt X 3/4" Fpt 90-d Black Elbow
1"-FPT X 3/4" FPT 90-D BLACK ELBOW-JPW1X3/4BE>
1 X 4-1/2-GN, 1"-mpt X 4-1/2" Black Nipple
1"-MPT X 4-1/2" BLACK NIPPLE-JPW1X41/2BN>
1"-MPT X 5" BLACK NIPPLES-JPW1X5BN>
1"-MPT X CLOSE BLACK NIPPLES-JPW1XCLBN>
1" X 36" O-1 OILHARD DRILLROD-DRI101 >
AI Mode Conversation: drill rod 1-1/16a2drill rod 1-1/16a2The 1-1/16" A2 drill rod is a precision-ground, air-hardening tool steel rod widely utilized in machining for tools, dies, punches, and rollers. Technical Specifications Diameter: 1-1/16 inches (1.0625 inches) Steel Grade: A2 Tool Steel (Air-hardening, 5% chrome alloy) Standard Length: Typically sold in 36-inch (3-foot) sections Diameter Tolerance: Ground to an exact precision of ±0.001" for sizes up to 3 inches.
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS AND OTHER COSTLY OR TIME-CONSUMING METHODS SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME
1-1/4"-MPT X 1/2"-FPT GALV/BUSHING-JPW11/4X1/2GB>
1-1/2" LIQUIDTITE ELECTRICAL CONDUIT-KAF11/2 >
1-1/2" X 1-1/2" X 1-1/4" BLACK TEE-JPW11/2X11/2X11/4B>
1-1/2 1-1/2" X 1-1/2" X 1-1/4" Galvanized Tee
1-1/2" X 1-1/2" X 1-1/4" GALVANIZED TEE-
1-1/2" X 1-1/4" F/S BLACK BUSHING-JPW11/2X11/4FSBB>
1-1/2" X 1/2" STEEL BLACK BUSHINGS-JPW11/2X1/2FSBB>
1-1/2"-FPT GALV/FLOOR FLANGES
1-1/2 1-1/2"-mpt X 2-1/2 Galvanized Nipple
1-1/2"-MPT X 2-1/2 GALVANIZED NIPPLES-JPW11/2X21/2GN>
1-1/2 1-1/2"-mpt X 2" Metal Galvanized Nipple
1-1/2"-MPT X 2" METAL GALVANIZED NIPPLE-JPW11/2X2GN>
1-1/2 1-1/2"-mpt X 3" Galvanized Nipple
1-1/2"-MPT X 3" GALVANIZED NIPPLES
1-1/2 1-1/2"-mpt X 31/2" Galvanized Nipple
1-1/2"-MPT X 31/2" GALVANIZED NIPPLES-
1-1/2 1-1/2"-mpt X 4-1/2" Galvanized Nipples
1-1/2"-MPT X 4-1/2" GALVANIZED NIPPLES-
1-1/2 1-1/2"-mpt X 4" Galvanized Nipple
1-1/2"-MPT X 4" GALVANIZED NIPPLE-JPW11/2X4GN>
1-1/2 1-1/2"-mpt X 8" Galvanized Nipple
1-1/2"-MPT X 8" GALVANIZED NIPPLES-JPW11/2X8GN>
1-1/4"-FPT X 1/2"-FPT GALVANIZED REDUCER-JPW11/4X1/2GR>
Recently Viewed
COILOCK PUSH-TO-CONNECT FITTINGS
MALE SWIVEL EXTER. ELBOW (TUBE TO MALE NPT)
TUBE O.D.--3/8" MALE NPT--3/8"
Size: 15/16 inch Finish: Black oxide Tool Category: Structural & Spud Wrenches
This model features a Quik-Lok® cord, pin-detent system to securely retain sockets or adapters and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. Delivering 300 ft. lbs of torque and weighing only 6 Lb., this tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.
Gates® Power Transmission Super HC® PowerBand® 4/5V1600 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
QuickCable® Brute™ 4266-001 Crimper, 8 to 4/0 AWG Cable/Wire
Browning® 1078278 Split Taper Bushing, 3/4 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
