HCI PREFERRED SUPPLIER
BALLASTS FOR T8 120/277 VOLT-UNV213TCP >
1.986 EZ LUBE DUST CAPS-RED2131 >
12" BLACK SEMI-ROUGH PVC GLOVES-GLV2133 >
SEAL KITS-181783 HALF SEALS-IMS214>
EXTRA LONG-ANTISEPTIC PADS--PK/100-MED21433 >
100-BOX KLEENEX TISSUE--CS/36-WHY21400 >
OIL SEALS-2.136" X 2.904" X .453"-IMS21400>
KLEENEX TISSUES--BX/100-WHY21400BOX >
2" X 168" 2-PLY TWISTED-EYE NYLON SLING - SWC21421 >
1-1/4" CARPET TRIM SCREW NAILS-M-D21485 >
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
Bore diameter2.9528 in
Outside diameter5.1181 in
Width0.9843 in
Inside Diameter (Bore): 75 mm (2.953 inches) Outside Diameter: 130 mm (5.118 inches) Width: 25 mm (0.984 inches) Closure Type: The "SZ" (or "SZZ") denotes double-sealed or double-shielded, which protects the rolling elements from dust and retains grease. Load Capacity: 14,900 lb. (Dynamic) and 11,000 lb. (Static)Max Speed: Up to 4,800 - 5,600 rpm
6" X 5/32" BLUE PLASTIC TIE--BOX OF 2000-BED2152570200 >
14.75" X 5/32" W PLASTIC TWIST TIES-BED2156800100 >
Inner Diameter (Bore): 80 mm Outer Diameter: 140 mm Overall Width: 26 mm Basic Dynamic Load Rating: 88 kN (approx. 19,780 lb.) Basic Static Load Rating: 85 kN (approx. 19,100 lb.) Limiting Speed: 5,000 RPM
5" CLEANING KIT DATA FLEXIBLE (EA)-VID216054 >
2" X 192" 2-PLY TWISTED-EYE NYLON SLING - SWC21621 >
SNAKE SKIN RED SAFETY GLASS CORDS-SSS217 >
SNAKE SKIN PURPLE SAFETY GLASS CORD-SSS218 >
OIL SEALS-2.188" X 3.189" X .640"-IMS21808>
OIL SEALS-2.188" X 3.188" X .469"-IMS21820>
48 SHOULDERED BENT SHOVEL HANDLE
C-3-GNY HOOKS WITH PIN-COV2183 >
OIL SEALS-2.188" X 3.251" X .438"-IMS21840>
