HCI PREFERRED SUPPLIER
1/8 X 6-BN, 1/8" Mpt X 6" Metal Black Nipple
1/8" MPT X 6" METAL BLACK NIPPLES-JPW1/8X6BN>
1/8"-FPT STEEL GALVANIZED COUPLING
1/8 -MALE PIPE THREADX2 BLACK NIPPLE >
1/8 HEX SOCKET PIPE PLUG
1/8" STEEL BALLS-SSB18 >
1/8 X 1-1/2-GN, 1/8"-mpt X 1-1/2" Galvanized Nipple
1/8"-MPT X 1-1/2" GALVANIZED NIPPLES-JPW1/8X11/2GN>
1/8 X 2 X 100 TEADIT 1000-DEGREE FIBERGLAS TAPE
1000-DEGREE FIBERGLASS TAPE-TEA18X2X100>
1/8 X 2-1/2-GN 1/8"-mpt X 21/2" Galvanized Nipple
1/8"-MPT X 21/2" GALVANIZED NIPPLES-JPW1/8X21/2GN>
1/8 X 2-1/2-GN, 1/8"-mpt X 2-1/2" Black Nipple
1/8"-MPT X 2-1/2" BLACK NIPPLES-JPW1/8X21/2BN>
1/8 X 2-GN, 1/8"-mpt X 2" Galvanized Nipple
1/8"-MPT X 2" GALVANIZED NIPPLES-JPW1/8X2GN>
1/8 X 3-1/2-GN, 1/8"-mpt X 3-1/2" Galvanized Nipple
1/8"-MPT X 3-1/2" GALVANIZED NIPPLE-JPW1/8X31/2GN>
1/8 X 3-GN, 1/8"-mpt X 3" Black Nipple
1/8"-MPT X 3" BLACK NIPPLES-JPW1/8X3BN>
1/8 X 3-GN, 1/8"-mpt X 3" Galvanized Nipple
1/8"-MPT X 3" GALVANIZED NIPPLE-JPW1/8X3GN>
1/8 X 4-1/2-BN, 1/8" X 4-1/2" Black Nipple
1/8" X 4-1/2" BLACK NIPPLES-JPW1/8X41/2BN>
1/8 x 4-1/2GN, 1/8" X 4-1/2" Galvanized Nipple
1/8" X 4-1/2" GALVANIZED NIPPLES-JPW18X412GN>
1/8 X 4-BN, 1/8" Mpt X 5 Metal Black Nipple
1/8" MPT X 5 METAL BLACK NIPPLES-JPW1/8X5BN>
1/8 X 4-GN, 1/8" X 4" Galvanized Nipple
1/8" X 4" GALVANIZED NIPPLE-JPW1/8X4GN>
1/8 x 5-GN 1/8"-mpt X 5" Galvanized Nipple
1/8"-MPT X 5" GALVANIZED NIPPLES-JPW18X5GN>
1/8 X 8-BN, 1/8"-mpt X 8" Black Nipple
1/8"-MPT X 8" BLACK NIPPLES-JPW1/8X8BN>
1/8 X 8-GN, 1/8"-mpt X 8" Galvanized Nipple
1/8"-MPT X 8" GALVANIZED NIPPLES-JPW1/8X8GN>
1/8" X 36" O-1 OILHARD DRILLROD-DRI1/801 >
1/8" -FEMALE PIPE THREAD 45-D METAL BLACK ELBOW-FIT1/8B45 >
1/8-B-45 1/8" 45-degree Black Elbow
1/8" 45-DEGREE BLACK ELBOW
1/8-B-45-STE 1/8" 45-d Black Street Elbow
1/8" 45-D BLACK STREET ELBOW-FIT1/8B45STE >
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-71S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 7.06 in OD, 71 Grooves, 7.118 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
2-GRV FINISHED BORE SHEAVE 7/8" BORE-BRW2BK28X7/8 >
Sealmaster 1-15/16"-ID 2-B TRB PILLOW BLOCKS SEA RPB-115-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Apex® 1500-P Replaceable Bit Driver, 1/4 in Range
16" X 20" X .100" PLEXIGLASS/P-GLS/P/GLS-GLS261424 >
MORSE® 31227 1195 Adjustable Round Split Threading Die, 1-1/4-12 UNF Thread, 1 in THK, 3 in OD Die, Carbon Steel
