HCI PREFERRED SUPPLIER

1/2"-FPT SCH-80 BLACK UNIONS

1/2" SCH-80 BLACK COUPLING-JPW1/2XHBC >

1/2"-FPT SCHEDULE-80 90-DEGREE BLACK ELBOW - JPW1/2XHBE >

1/2"-FPT SCH-80 BLACK TEES-JPW1/2XHBT>

1/2" SCHEDULE 80 THREADED FLANGES-FIT1/2XHBWFTHR >

1/2" SOCKET WELD BLACK 45-D ELBOW-FIT1/2XHSWB45 >

THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDE

CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.

5" INTERNAL RETAINING RING

1/2" 1-PIECE CLAMP SHAFT COLLAR

1/2" -ID JAW COUPLING HALVES

1/2" -ID JAW COUPLING HALVES

1/2" -ID STAINLESS STEEL SOLID SHAFT COLLAR

1/2" STAINLESS STEEL 1-PIECE CLAMP SHAFT COLLAR

1/2" -ID SOLID SHAFT COLLAR

1/2" -ID JAW COUPLING HALVES

1/2" X 16-GA SQUARE TUBING-JMS1/2SQX16GAX24 >

1/2" X .020" METAL STRAP--ROLL OF 100#-DUB1/2X020 >

1/2" X .023" METAL STRAP--ROLL OF 100#-DUB1/2X023>

1/2" -MALE PIPE THREADX1-1/2" BLACK NIPPLE-FIT1/2X11/2BN >

1/2" -MALE PIPE THREADX1-1/2" BLACK NIPPLE-JPW1/2X11/2BN >

1/2" -MALE PIPE THREADX1-1/2" GALVANIZED NIPPLE-FIT1/2X11/2GN >

1/2" -MALE PIPE THREADX1-1/2" GALVANIZED NIPPLE-JPW1/2X11/2GN >

1/2" -MALE PIPE THREADX1-1/2" STAINLESS STEEL NIPPLE-FIT1/2X11/2SSN >