HCI PREFERRED SUPPLIER
R-4-ZZ Double Sealed Ball Bearing
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
R-4-A-ZZ Double Shielded Mini Ball Bearing
DOUBLE SHIELDED MINI BALL BEARING-GULR4AZZ >
R-4-A-2-RS DOUBLE-SEALED MINI BALL BEARINGS
DOUBLE SEALED MINI BALL BEARING-GULR4A2RS >
R-37341-600 INGERSOLL RAND 1/2" INGERSOL REGULATORS
1/2" INGERSOL REGULATORS-INGR37341600>
R-3603-26 7/16" -idx5/8" -OD Tygon Tube (ft)
7/16" -IDX5/8" -OD TYGON TUBE (FT)-CPIR360326 >
R-3603-24 3/8" -idx5/8" -OD Tygon Tube (ft)
3/8" -IDX5/8" -OD TYGON TUBE (FT)-CPIR360324 >
R-3590-TBK 2-roll Standard Toilet Tissue
2-ROLL STANDARD TOILET TISSUE DISPENSER-WHYR3590TBK >
R-3-2-Z Double Shielded Mini Ball Bearing
DOUBLE SHIELDED MINI BALL BEARING-GULR32Z >
R-3-18 R-3 Rivet Hinged Fastener
R-3 RIVET HINGED FASTENER - COVR318 >
R-20 Double Open Face Ball Bearing
DOUBLE OPEN FACE BALL BEARING - GULR20>
Recently Viewed
7.000" X 8.000" X .625" OIL SEALS-TCM70806TA >
OIL SEALS-.787" X 1.338" X .275"-CHI7745>
.750" X 1.312" X .250" OIL SEAL-CHI7475 >
4.875" X 6.250" X .500" OIL SEALS-TCM48625TA >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
5.125" X 6.250" X .500" OIL SEALS-TCM51625TA >
