Grey Pneumatic
GP® 4076R Standard Length Socket, 1 in, 2-3/8 in Hex Socket, 6 Points
GP® 4084D Deep Length Socket, 1 in, 2-5/8 in Hex Socket, 6 Points
GP® 4082D Deep Length Socket, 1 in, 2-9/16 in Hex Socket, 6 Points
High-quality chro-moly alloy steel.
GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.
Weight: 1.2 lbs.
Image shown may not be actual product but represents product.
Poly bag with barcode
Lifetime Warranty
GP® 4104D Deep Length Socket, 1 in, 3-1/4 in Hex Socket, 6 Points
GP® 9912F Standard Length Socket Driver Bit, 1/4 in Hex Drive, 3/8 in, 0.39 in L Bit
GP® 4144R Standard Length Socket, 1 in, 4-1/2 in Hex Socket, 6 Points
GP® 4128D Deep Length Socket, 1 in, 4 in Hex Socket, 12 Points
GP® 3043M Standard Length Socket, 3/4 in, 43 mm Hex Socket, 6 Points
GP® 4056M Standard Length Socket, 1 in, 56 mm Hex Socket, 6 Points
GP® 3038MD Deep Length Socket, 3/4 in, 38 mm Hex Socket, 6 Points
Recently Viewed
Tsubaki® DS80ATL17 Type A Double Single Roller Chain Sprocket, 2-1/2 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, 1 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
6" X 6" 2-MIL ZIPLOCK BAG--BX/1000-WHY6X6ZIP2 >
1/8" PEG HOOK ASSORTMENT-NTL180760 >
Littelfuse® POWR-GARD® NLS060 Fast Blow One Time Fuse, 60 A, 600 V AC/400 V DC, 20/50 kA Interrupt, Class: K5, Cartridge Body
NLS series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50000 A. They replace all Class H fuses which have only a 10000 A interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian "Code" fuses specifically designed to meet Canadian electrical code type P fuse requirements for residential use. They have a 10000 A interrupting rating. However, to obtain the added benefits of time delay, current limitation and higher interrupting rating, consider the use of POWR-PRO® IDSR Indicator fuses for circuits between 250 and 600 V. The user gets all the benefits of time delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. complete information on these fuses may be found in the POWR-PRO® section of this catalog. for circuits upto 250 V, see FLNR fuses in this section of the catalog.
Diablo® DSD1375S15 Impact Step Drill Bit, 15 Steps, 3/8 in Shank
Littelfuse® POWR-GARD® CNN100 Fast Acting Fuse, 100 A, 48 V DC, 2500 A Interrupt
CNN_E fuses are rated for applications up to 80 VDC. As fork lift trucks voltages increase, circuit protection needs to be rated higher than the standard CNN products to handle the increased voltage. The CNN_E is considered very fast acting for quicker reaction time.