Generic
125-032-0175 5/16" X 1-3/4" USS Carriage Bolts
5/16" X 1-3/4" USS Carriage Bolts
125-032-0225 5/16" X 2-1/4" USS Carriage Bolts
5/16" X 2-1/4" USS Carriage Bolts
125-032-0325 5/16" X 3-1/4" USS Carriage Bolts
5/16" X 3-1/4" USS Carriage Bolts
125-032-0450 5/16" X 4-1/2" USS Carriage Bolts
5/16" X 4-1/2" USS Carriage Bolts
125-032-0550 5/16" X 5-1/2" USS Carriage Bolts
5/16" X 5-1/2" USS Carriage Bolts
125-032-0750 5/16" X 7-1/2" USS Carriage Bolts
5/16" X 7-1/2" USS Carriage Bolts
Recently Viewed
7" X 1.50" WHEEL--1/2" -ID BALL BEARING-JWH716005 >
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
7/16"-20 SAE GR-8 Hex Nuts
Browning® 1002393 TB Series Type 13 Web Multiple Sheave With Split Taper Bushing, 3/4 to 2-11/16 in Split Taper Bore, 8.28 in OD, 2 Grooves, 7.8 in (A)/8.3 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
