Freud Tools

Steel Demon® saw blades are specially designed for the extreme demands of ferrous metal cutting thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. With up to 40X the life of standard abrasive disc, steel Demon® delivers unparalleled performance and superior quality cuts. Blades feature Freud's TiCo™ hi density carbide, laser cut bodies, anti-vibration technology, Perma-SHIELD® non-stick coating, triple chip design, and pre tensioned blades.

Diablo® framing blades give exceptional long life in ripping and crosscutting applications. Diablo® thin kerf requires less power from your saw, so it's the perfect blade for portable tools. Laser-cut stabilizer vents for reduced vibration and precise cuts. Durable micro grain titanium carbide for razor sharp cuts and long life. Perma-SHIELD® permanent coating is a superior aluminum alloy coating that helps reduce friction, heat build-up, gumming and is resistant to rust, which add up to longer blade life. Laser-cut thin kerf gives fast, clean cuts.

New Demo Demon® Amped™, the ultimate framing and demolition saw blade for up to 10 times cutting performance in intense applications. This 7-1/4 in 24-tooth blade includes a new industry-first tooth grind sequence, Tracking Point Amped™ that is specifically designed to provide extreme durability and effortless cuts; even when cutting abrasive materials such as shingles, bolts or nail-embedded wood.

Diablo® finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo® finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.

Diablo® D0748CFX Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, 48 Teeth

Diablo® finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo® finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.

The new 8 in 42T steel Demon® cermet blade cuts both metal and stainless steel while providing 5X the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade will be a game changer for metal cutting! this blade is specially formulated with cermet teeth with a triple chip grind tooth design, laser cut blade bodies, anti-vibration technology, and Perma-SHIELD® non-stick coating to deliver precise cuts with no sparks and cool, burr free edges.

Diablo® general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table and miter saws, Diablo® blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and "chop" style miter saws as well as table saws.

The new 10 in 50T steel Demon® cermet blade cuts both metal and stainless steel while providing 5X the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade will be a game changer for metal cutting. This blade is specially formulated with cermet teeth with a triple chip grind tooth design, laser cut blade bodies, anti-vibration technology, and Perma-SHIELD® non-stick coating to deliver precise cuts with no sparks and cool, burr free edges.

Diablo® combination blade is ideal for ripping and crosscutting wood and wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo® large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

Diablo® specialty non-ferrous plastics thin kerf blade has a triple chip grind (TCG) tooth design for long life and a clean, burr-free finish. Diablo® blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

The new 12 in 60T Steel Demon® cermet blade cuts both metal and stainless steel while providing 5x the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade will be a game changer for metal cutting! This blade is specially formulated with cermet teeth with a triple chip grind tooth design, laser cut blade bodies, anti-vibration technology and Perma-SHIELD® non-stick coating to deliver precise cuts with no sparks and cool, burr-free edges.

Diablo® combination blade is ideal for ripping and crosscutting wood and wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo® large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

Fine finish blades let trim crews get the most out of sliding or "chop" style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing "grabbing" or blowout. Diablo® particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and moulding.

Diablo® blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out. Laminated materials are highly abrasive, so these blades feature a TiCo™ carbide blend ideally suited to harsh service. Diablo® blade is ideal for 12 in sliding miter saws and portable table saws.

The new 14 in 72T steel Demon® cermet blade cuts both metal and stainless steel while providing 5X the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade will be a game changer for metal cutting. This blade is specially formulated with cermet teeth with a triple chip grind tooth design, laser cut blade bodies, anti-vibration technology, and Perma-SHIELD® non-stick coating to deliver precise cuts with no sparks and cool, burr free edges.

The new 14 in 90T steel Demon® cermet blade cuts both metal and stainless steel while providing 5X the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade will be a game changer for metal cutting. This blade is specially formulated with cermet teeth with a triple chip grind tooth design, laser cut blade bodies, anti-vibration technology, and Perma-SHIELD® non-stick coating to deliver precise cuts with no sparks and cool, burr free edges.

The next generation Diablo® demo Demon® carbide tipped reciprocating blades with new variable tooth design are specifically designed for maximum performance in nail-embedded wood. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life than bi-metal blades in nail-embedded wood.

The next generation Diablo® demo demon carbide tipped reciprocating blades with new variable tooth design are specifically designed for maximum performance in nail embedded wood. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life than bi-metal blades in nail embedded wood.

The Diablo® steel Demon® carbide tipped reciprocating blades are the first carbide tipped blades designed for extreme metal cutting including high strength alloys, cast iron and stainless steel. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life than standard bi-metal blades in extreme thick metal cutting applications between 1/8 to 1/2 in.

Freud® panel pilot bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting and the pilot acts as a guide for template work.

Freud® 66-100 Router Bit, Bevel Trim Router, 1/4 in Dia Cutting, 1-1/2 in OAL, 1/4 in D Cutting, 2 Flutes, 1/4 in Dia Shank, Carbide

New Precision Shear™ forstner bits feature a double ground, razor sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear™ forstner bits has serrated edges.

New Precision Shear™ forstner bits feature a double ground, razor sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear™ forstner bits has serrated edges.