Dodge Industrial

Dodge® Tigear-2® 26S20R Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 2.71 hp, 20:1 Gear, 88 rpm Maximum Output, 1673 in-lb Torque Rating

The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.

Dodge® Tigear-2® 26S25R Size 26 Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 2.26 hp, 25:1 Gear, 70 rpm Maximum Output, 1677 in-lb Torque Rating

The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.

Dodge® Tigear-2® 35S20R Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 5.79 hp, 20:1 Gear, 88 rpm Maximum Output, 3620 in-lb Torque Rating

The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.

Dodge® Tigear-2® 35S40R Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 3.23 hp, 40:1 Gear, 44 rpm Maximum Output, 3622 in-lb Torque Rating

The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.

Dodge® Tigear-2® 40A20L21 Size 40 Standard Right Angle Worm Gear Speed Reducer, 3-Piece Coupled Input, Solid A Shaft Output, 7.75 hp, 20:1 Gear, 88 rpm Maximum Output, 4822 in-lb Torque Rating

The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.

Dodge® Torque-Arm® II 905126 Seal Kit, For Use With Torque-Arm® TA5215H Reducer, Domestic

Dodge® Torque-Arm® II 905126 Seal Kit, For Use With Torque-Arm® TA5215H Reducer, Domestic

Dodge® Ultra Kleen™ 136705 205 Normal Duty Pillow Block Ball Bearing Unit With Insert, 1 in Dia Bore, 2 in L Bolt Center-to-Center, 1.44 in Base to Bore Centerline, 3-1/4 in OAL x 1.32 in OAH

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

Dodge® Ultra Kleen™ 136794 205 Normal Duty Non-Expansion Ball Bearing Unit, 1 in Dia Bore, 3.89 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.89 in OAL/Dia

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

Dodge® Ultra Kleen™ 136798 207 Normal Duty Non-Expansion Ball Bearing Unit, 1-7/16 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.18 in OAL/Dia

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

Dodge® Ultra Kleen™ 136799 208 Normal Duty Non-Expansion Ball Bearing Unit, 1-1/2 in Dia Bore, 5.65 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.71 in OAL/Dia

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

Dodge® Ultra Kleen™ 136802 205 Normal Duty Non-Expansion Ball Bearing Unit, 1 in Dia Bore, 1.63 in L Bolt Center-to-Center, 3-Bolt Bracket Flange Mount, 2.62 in OAL/Dia

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

Dodge® Ultra Kleen™ 136889 208 Normal Duty Non-Expansion Ball Bearing Unit, 40 mm Dia Bore, 101.6 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 128.5 mm OAL/Dia

Dodge® Ultra Kleen™ mounted ball bearings are ideal for washdown applications. The stainless steel set screw (SC) insert is deployed in either of a polymer or stainless steel housing. The QuadGuard™ triple lip seal with rubberized flinger provides superior protection against contaminants while the patented Maxlife™ cage retains lubricant.

DS-80-ATL-17 Dodge® 101468 Hardened Teeth Type ATL Roller Chain Sprocket, 2-11/16 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, Low-Carbon Steel

Ideal for low-speed power transmission applications. Roller chain drives have the ability to handle high shock loads and deliver dependable performance make them the drive of choice for many applications. Dodge® Taper-Lock® sprockets require no expensive or time-consuming re-matching. Their taper-bushing mount automatically compensates for variations in shaft and sprocket machining tolerances. With Dodge® Taper-Lock® sprockets, there are no protruding flanges or screw-heads to take up valuable shaft space. Their compact design provides for more power-dense packages.

EC-206 Dodge® 128282 206 Bearing End Cover, 2-1/2 in OD, 1-21/64 in W, Polymer Housing

EC-206 Dodge® 128282 206 Bearing End Cover, 2-1/2 in OD, 1-21/64 in W, Polymer Housing

EC-206-X Dodge® 128207 206 Bearing End Cover, 2-47/64 in OD, 2-1/16 in W, Polymer Housing

EC-206-X Dodge® 128207 206 Bearing End Cover, 2-47/64 in OD, 2-1/16 in W, Polymer Housing

EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing

EC-207-X Dodge® 128209 207 Bearing End Cover, 3-1/4 in OD, 2-11/32 in W, Polymer Housing

EC-209-X Dodge® 128213 209 Bearing End Cover, 3-11/16 in OD, 2-21/64 in W, Polymer Housing

EC-209-X Dodge® 128213 209 Bearing End Cover, 3-11/16 in OD, 2-21/64 in W, Polymer Housing

ECC-EZ-205 Dodge® 128961 Metal Detectable Snap On Closed End Cover, 2-11/64 in OD, 3-1/16 in W, High-Density Polyethylene (HDPE) Housing, Blue

All Dodge® E-Z-Kleen® and Ultra Kleen™ bearings include a housing groove to accept a snap-on polymer end cover. These durable covers are easy to install and each is provided with a drain hole to prevent moisture from collecting inside the cover. The snap-on style of end cover incorporates an additional lip on the mounting surface for a rigid fit within the housing. This tight fit creates a better seal prevents movement of the cover during operation and high pressure cleaning. Dodge® snap-on end covers provide positive sealing in wet environments and create safer working conditions by enclosing rotating shafts.

F-4-BE-103-R Dodge® 23093 103 Flange Mount Roller Bearing Unit, 1-3/16 in Dia Bore, 2.88 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 3-3/4 in OAL/Dia

F-4-BSCM-100 Dodge® 126226 206 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-1/4 in OAL/Dia

Dodge® 126226 206 Medium Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 4-1/4 in OAL/Dia

F2B-DL-012 Dodge® 128757 204 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3.53 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.41 in OAL/Dia

F2B-DL-012 Dodge® 128757 204 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3.53 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.41 in OAL/Dia

F2B-GT-107 Dodge® 129312 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia

With its patented pull/push adapter system, fully concentric 360 deg inner ring, and completely interchangeable housing design, the Dodge® Grip Tight® adapter ball bearing is the easy-on/easy-off solution for damage-free shafting, reduced vibration and greater cost/inventory savings.

F2B-SC-012 Dodge® 124170 204 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3.53 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.41 in OAL/Dia

F2B-SC-012 Dodge® 124170 204 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3.53 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 4.41 in OAL/Dia

F2B-SC-104 Dodge® 124276 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia

F2B-SC-104 Dodge® 124276 207 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 1-1/4 in Dia Bore, 5.12 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 6.13 in OAL/Dia