Crosby Group
01-02016 CROSBY 3" 5/16"/3/8" 2-T SNATCH BLOCKS
Working Load Limit (WLL): 2 Tons (4,000 lbs)Sheave Size: 3 inches Wireline Size Compatibility: 5/16" to 3/8"Bushing Type: Self-lubricating bronze bushing Material & Construction: Forged alloy steel, quenched and tempered Standards Compliance: Meets or exceeds all ASME B30.26 requirements (covering identification, ductility, design factor, proof load, and temperature limits) Fatigue Rating: Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
06-083077 CROSBY 6" IRON BLOCK 3/4MR 302B GALV
DOUBLE PULLEY6" IRON BLOCK 3/4MR 302B GALV
06-83031 CROSBY 4" DBL PULLEY 1/2" MR 302B GALV
Crosby part number 0683031 corresponds to a 4-inch Galvanized Double Pulley Block (Model 302B) designed for a 1/2-inch manila rope. This industrial lifting tool is manufactured by the Kito Crosby material handling group
09-13042 CROSBY 6"-DIAMETER 1/2" WIRE ROPE SHEAVES
Nominal Outside Diameter: 6 inches Pattern Number: 1193Wire Line / Rope Size: 1/2 inch Shaft Size: 1 inch Hub Width: 1-1/16 inches Rim Width: 1 inch Material: Powder Metal (P.M.) Approximate Weight: 3.75 lbs
10-82571 CROSBY 8.5-TON SHACKLE PINS
The CROSBY 1082571 is an 8.5-ton shackle pin designed for Crosby G4075 series slng shackles
10-97920 CROSBY 316-A 1/4" 7/16"WR SHUR-LOC HOO
Crosby stock number 1097920 refers to the S-316A SHUR-LOC® Eye Hook designed for Grade 80 alloy chains with a diameter of 7-8 mm (1/4 - 5/16 inch). It is a heavy-duty, self-locking rigging component manufactured by Kito Crosby.
20-00347 CROSBY 2.25X4.656-PN ASSY BB REPAIR KITS
CROSBY 2000347 refers to the manufacturer part number for a replacement Center Pin Assembly used in heavy-duty rigging equipment. Specifically, this assembly is a critical repair component for the Crosby 407 BL series snatch blocks.
4-61789 CROSBY 10" BRONZE BUSHING-STYLE SHEAVES
Model / Series: 10-2Nominal Outside Diameter: 9-7/8 inches Compatible Wire Rope Size: 1/2 inch Shaft (Bore) Size: 1-1/2 inches Rim Width: 1-3/4 inches Hub Width: 1-5/8 inches Nominal Hub Outside Diameter: 2-9/16 inches Nominal Tread Diameter: 8-5/16 inches Material: Forged Steel (F.S.) Approximate Weight: 14.50 lbs
6-67228 CROSBY 4" STEEL BLK 1/2 MR TRIPLE SHEAVES
Block Size: 4 inches End Fitting: HS (Loose Side Hook with Latch) Rope Size: Designed for 5/8 inch diameter line Sheave Configuration: Single sheave featuring a bronze bushing for extended block life
A-1337-3/4 CROSBY 3/4" LOKALOY COUPLINGS
The Crosby A-1337 3/4" is a heavy-duty LOK-A-LOY® 10 Alloy Connecting Link (Brand Part Number: 1015154) used for secure chain assembly in industrial lifting and rigging. It is specifically engineered to create reliable, permanent connections between chains, master links, and hooks without requiring special installation tools
A-1337-5/16 CROSBY 5/16" LOKALOY COUPLINGS
orking Load Limit: 5,700 lbs.
Safety Factor: 4:1
Grade: 80 / 100
Chain Size: 5/16"
Item Weight: 0.35 lbs.
Standards: Meets or exceeds ASTM A952 / A952M & ASME B30.26 requirements.
Manufacturer Name: Crosby®
A-323-3/8 CROSBY 3/8" FORGED EYE GRAB HOOKS
The Crosby A-323 3/8" is a heavy-duty, forged alloy steel Eye Grab Hook primarily designed for chain shortening, load securement, and tie-down applications. Manufactured by Kito Crosby, this hook has a Working Load Limit (WLL) of 7,100 lbs (3.55 tons) and features a standard 4:1 safety design factor.
A-323-5/16 CROSBY MATERIAL HANDLING GROUP 5/16" FORGED-EYE GRAB HOOK
The designation CROSBY A323 5/16 refers to a 5/16-inch alloy eye hook or rigging component manufactured by The Crosby Group.However, because industrial catalogs often have highly precise alphanumerical overlaps, this part string typically matches two entirely different types of hardware.
A-327-1/4 CROSBY 1/4" EYE SLING HOOKS-
You said: CROSBY A3271/4The Crosby A327 1/4" (specifically manufacturing part number 1003764) is a heavy-duty, Grade 80 Alloy Steel Eye Sling Hook. This high-strength industrial rigging hook is engineered for overhead lifting and chain sling assemblies. Note that while the model has been largely succeeded by newer Grade 100 variations like the L-1327, it is still highly sought after as a reliable component for existing legacy lifting setups.
A-327-5/8 CROSBY 5/8" ALLOY SLING HOOK-
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
S-4088 Latch Kit fits hooks.
A-327X3/4 CROSBY 3/4" EYE SLING HOOKS-
Crosby A327 3/4 Eye Sling Hook WLL 28300# Grade 80
A-330-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" ALLOY CLEVIS GRAB HOOK
Working Load Limit (WLL): 12,000 lbs (6.00 tons) Design Factor: 4:1 safety factor Chain Rating: Designed for Grade 80 / Grade 8 alloy chains. Overhead Lifting: Suitable for overhead lifting only if it is proof-tested as part of a chain sling assembly according to ASME B30.9 standards.
A-330-1/4 CROSBY MATERIAL HANDLING GROUP 1/4" GR-80 CLEVIS GRAB HOOK
Forged steel, Quenched and Tempered
Features quick and easy assembly
Designed for use with Grade 70 chain
Not intended for overhead lifting
Must be proof-tested prior to use with a Grade 80 chain sling, in accordance with ASME B30.9
A-330-3/4 CROSBY K3/4"ALLOY CLEVIS GRAB HOOK
The Crosby A-330 3/4" is a heavy-duty Grade 80 alloy steel clevis grab hook manufactured by Kito Crosby. It is specifically engineered for securing, shortening, and controlling heavy loads in tie-down and transport applications using 3/4-inch chains.
A-330-3/8 CROSBY MATERIAL HANDLING GROUP 3/8" GR-80 CLEVIS GRAB HOOK
3/8" ALLOY GRAB HOOKS 1027285-CROA3303/8 >
A-330-5/16 CROSBY MATERIAL HANDLING GROUP 5/16" G80 CLEVIS GRAB HOOK
The Crosby A-330 5/16" is a heavy-duty, forged alloy steel clevis grab hook designed primarily for tie-down, load securement, and transport applications. It is specifically engineered to achieve positive engagement when grabbing back into a chain to shorten or hold a load.
A-330-5/8 CROSBY MATERIAL HANDLING GROUP 5/8" G-80 CLEVIS GRAB HOOK
The Crosby A-330 5/8" is a heavy-duty, Grade 80 alloy steel clevis grab hook manufactured by Kito Crosby under the part number 1027347. It is designed primarily for secure tie-down, cargo control, and chain-shortening applications using 5/8-inch (16mm) transport chain.
A-331-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" CLEVIS SLIP HOOKS
Working Load Limit (WLL): 9,000 lbs (4.50 Tons). Design Safety Factor: 4:1 minimum ultimate load. Material Construction: Forged alloy steel quenched and tempered. Compatible Chain: Optimized for Grade 70 transport chain. Dimensions: 1.69" throat opening width, 0.63" pin diameter, and roughly 2.75 lbs. total weight. Attachment Method: Clevis style with a quenched and tempered alloy load pin and cotter included.
A-331-1/4 CROSBY MATERIAL HANDLING GROUP 0 DYR - 9 HI 1/4" CLEVIS SLIP HOOKS
Compatible Chain Size: 1/4" (also fits 9/32" Grade 70 / Grade 80 chain) Working Load Limit (WLL): 2,750 lbs (1.38 tons) up to 3,500 lbs depending on the rating standard Design Safety Factor: 4:1Attachment Type: Clevis pin configuration for quick, secure linking Lifting Restriction: NOT intended for overhead lifting. It must not be used with chain slings for overhead crane work.
Recently Viewed
Milwaukee® 2735-20 Fixed Focus Rechargeable Cordless Work Light, LED Lamp, 18 V DC, Li-Ion Battery
The MILWAUKEE® M18™ Work Light lasts 600X longer than conventional incandescent light bulbs and is powered by M18™ REDLITHIUM™ batteries. The LED work light features a 135° rotating head to easily direct the light beam at the desired work area and an integrated hook allows for hands-free use. The cordless work light features a sealed aluminum head to provide impact and weather resistance and comes with a limited lifetime LED warranty, the LEDs never need to be replaced.
Knipex® 02 02 225 High Leverage Combination Plier, 1-1/2 in L x 1 in W x 19/32 in THK Jaw, Knurled Jaw Surface, 9 in OAL, ISO 5746
Knipex® 02 02 225 High Leverage Combination Plier, 1-1/2 in L x 1 in W x 19/32 in THK Jaw, Knurled Jaw Surface, 9 in OAL, ISO 5746
25' SPIRAL TAPES WITH REELS. EASY-GRIP HANDLE 8-1/2" REEL DIAMETER.
12-VOLT 36-LED AMBER STROBE LIGHT ASSEMBLY - PML36LEDA>
The 15-Inch Tool Tote features 12 pockets to hold a variety of tools. Constructed of rugged, water-resistant, denier polyester, this go-to tote will withstand the harshest job sites. The shoulder pad is contoured, padded and slip-resistant for stress-free and hands-free portability. Drain holes in the molded bottom prevent any water retention. You'll be amazed at the number of tools and supplies this bag can carry.
64-101 STANLEY TOOLS Standard Screwdriver, #1 Phillips® Point, Alloy Steel Shank, 6-3/4 in OAL, Acetate Handle, Black Oxide Tipped/Polished Chrome
Large, deep fluted acetate handle stands upto heavy duty industrial use
• Easy-to-clean handle
• Flanges on the blade inside the handle provides a solid, twist resistant blade
• Bars are fully ground and polished, then chrome plated for corrosion resistance
• Bars are made of alloy steel and heat treated for strength and durability
• Precision machined Phillips® tips are blasted black oxide for proper fastener fit and to eliminate plate chipping
• Point size indicated on handle
• 100% acetate handle stands upto heavy duty industrial use
• Precision cold formed tips provide high torque performance
• Black oxide tips provide corrosion resistance and precise fit
