Crosby Group
20-00347 CROSBY 2.25X4.656-PN ASSY BB REPAIR KITS
CROSBY 2000347 refers to the manufacturer part number for a replacement Center Pin Assembly used in heavy-duty rigging equipment. Specifically, this assembly is a critical repair component for the Crosby 407 BL series snatch blocks.
10-97920 CROSBY 316-A 1/4" 7/16"WR SHUR-LOC HOO
Crosby stock number 1097920 refers to the S-316A SHUR-LOC® Eye Hook designed for Grade 80 alloy chains with a diameter of 7-8 mm (1/4 - 5/16 inch). It is a heavy-duty, self-locking rigging component manufactured by Kito Crosby.
10-82571 CROSBY 8.5-TON SHACKLE PINS
The CROSBY 1082571 is an 8.5-ton shackle pin designed for Crosby G4075 series slng shackles
09-13042 CROSBY 6"-DIAMETER 1/2" WIRE ROPE SHEAVES
Nominal Outside Diameter: 6 inches Pattern Number: 1193Wire Line / Rope Size: 1/2 inch Shaft Size: 1 inch Hub Width: 1-1/16 inches Rim Width: 1 inch Material: Powder Metal (P.M.) Approximate Weight: 3.75 lbs
06-83031 CROSBY 4" DBL PULLEY 1/2" MR 302B GALV
Crosby part number 0683031 corresponds to a 4-inch Galvanized Double Pulley Block (Model 302B) designed for a 1/2-inch manila rope. This industrial lifting tool is manufactured by the Kito Crosby material handling group
06-083077 CROSBY 6" IRON BLOCK 3/4MR 302B GALV
DOUBLE PULLEY6" IRON BLOCK 3/4MR 302B GALV
01-02016 CROSBY 3" 5/16"/3/8" 2-T SNATCH BLOCKS
Working Load Limit (WLL): 2 Tons (4,000 lbs)Sheave Size: 3 inches Wireline Size Compatibility: 5/16" to 3/8"Bushing Type: Self-lubricating bronze bushing Material & Construction: Forged alloy steel, quenched and tempered Standards Compliance: Meets or exceeds all ASME B30.26 requirements (covering identification, ductility, design factor, proof load, and temperature limits) Fatigue Rating: Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
Recently Viewed
2-3/4" BLACK OPEN END WRENCH - ARS31088>
FHP V-BELTS-BRW4L560>
7/16" Hi-Collar Lockwashers
NOTCHED GRIP V-BELTS-BRW3VX425>
PLATE GRIP FASTENERS BREAKERS--PACK OF 2-COV1 >
Southwire® 10638502 Bare Wire, 600 V AC, (1) 6 AWG Bare Solid Copper Conductor, 315 ft L
Southwire's Bare Copper is used for residential electrical systems before entering the home, usually at the meter base. It is also used as a residential grounding wire. Solid and stranded bare copper (Classes AA and A) are used for overhead transmission and distribution applications. Solid bare copper (Classes B and C) are used for non-insulated hook-ups, jumpers and electrical construction.
