Chicago Pneumatic

2.750" X 3.396" X .438" RADIAL SHAFT SINGLE LIP OIL SEAL. NITRILE RUBBER MATERIAL CRWH1 DESIGN.

2.756" X 4.331" X .499" OIL SEALS -CHI27791 >

2.756" X 4.331" X .472" OIL SEALS

3.500" X 4.842" X.903" SCOTSEALS. Steer Axle Wheel, Oil, Seal Replaces For 35058 / 35059 370001A, 308-0836

Nitrile Rubber Wheel End Component
3 in Shaft Diameter
4 in Housing Bore Diameter

Front Wheel Seal, 4.848" O.D, 3.500" I.D, Commonly Used On Ford Trucks/Buses

3.500" X 4.852" X .904" FRONT AXLE / TRACTOR/SCOTSEAL- INCH

CRSEAL 38220 / 3.813X5.251X0.469 CRSH1 R ; SGL LIP SEAL
Lip Seal; 3-13/16" Shaft Dia; 5-1/4" Housing Bore; 0.469" Nominal Width; Nitrile Lip; Solid Seal; 15/32" Actual Width; Spring Loaded; 1 Sealing Lips; Carbon Steel Garter Lip Retainer; Steel Case; CRSH1 Seal Design Code

Single Lip Shaft Seal with Spring
5.25 in Shaft Diameter
6.5 in Housing Bore
0.5 in Overall Width
Nitrile Rubber (NBR) Lip Material
SKF Wave Seal

.551" X 1.024" X .276" METRIC M.O.D. GREASE SEALS

.551" X .984" X .276" METRIC OIL SEALS

OIL SEAL
5-1/2 IN ID
7-1/2 IN OD
NITRILE

Chicago Rawhide (SKF) Radial Shaft Seal 5569
Single Lip Grease Seal - Solid
0.563" Shaft

0.999" Outside Diameter
0.219" Width

Nitrile Rubber Material
HM14 Design

CR (SKF) Radial Shaft Seal 5605
by SKF

$8.56
4 IN STOCK
Chicago Rawhide (SKF) Radial Shaft Seal 5605

Single Lip Oil Seal - Solid
0.554" Shaft

0.999" Outside Diameter

0.250" Width

Nitrile Rubber Material
CRW1 Design

Double Lip Oil Seal - Solid, 6.500 in Shaft Dia., 7.500 in OD, 0.500 in Overall Width, CRWA1 Design, Nitrile Rubber (NBR) Lip Material

Single Lip Shaft Seal with Spring
6.5 in Shaft Diameter
7.5 in Housing Bore
0.5 in Overall Width
Nitrile Rubber (NBR) Lip Material
SKF Wave Seal

.685" X 1.180" X .275" OIL SEAL -CHI6757 >

This is a genuine replacement part for Chicago Pneumatic. The anvil is designed to be hit by the hammer to forcefully rotate the piece. This part is made from high-quality metal. This item is sold individually.

The CP3019 Series - angle pneumatic Die Grinders, with a 1/4' (6.35 mm) collet capacity or CNOMO collet capacity consists of 4 models with 2 free speed options from 12,000 to 20,000 rpm. The powerful motor offers 0.5 hp (375 W) for optimum productivity in heavy applications such as deburring, die contouring, and light chamfering. The range is characterized by a compact design and a simplified safety lever.

The CP3019 Series - angle pneumatic Die Grinders, with a 1/4' (6.35 mm) collet capacity or CNOMO collet capacity consists of 4 models with 2 free speed options from 12,000 to 20,000 rpm. The powerful motor offers 0.5 hp (375 W) for optimum productivity in heavy applications such as deburring, die contouring, and light chamfering. The range is characterized by a compact design and a simplified safety lever.

AIR PNEUMATIC CHIPPING HAMMERS-CHCCP4123PYSA>

3/8" DRIVE HEAVY DUTY PISTOL GRIP AIR IMPACT WRENCH, OIL BATH DYNA-PACT CLUTCH, HANDLE EXHAUST, ULTIMATE TORQUE OF 200 FT. LBS

1/2" DRIVE HEAVY DUTY AIR IMPACT WRENCH, DYNA-PACT OIL BATH CLUTCH, ONE HAND PUSH BUTTON FORWARD & REVERSE, 4" POSITIVE POWER SETTINGS, FULL POWER REVERSE, HANDLE EXHAUST

Air Impact Wrench (3/4 Inch), Air Impact Gun Industrial Repair & Assembly Tool, Pistol Handle, Pin Clutch, Max Torque Output 1000 ft. lbf/1350 Nm 4200 RPM