Magnetic Drilling Press Accessories
Hougen® 05779 Wear-Resistant Carbide Insert, For Use With Carbide Countersink Kit
Hougen® 05779 Wear-Resistant Carbide Insert, For Use With Carbide Countersink Kit
Milwaukee® 4292-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 750 rpm No Load, 1-1/4 in Drill Capacity, 1 in Chuck Size, 4 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 375 and 750 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee® 4297-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 500 rpm No Load, 1-1/4 in Drill Capacity, 1-3/16 in Chuck Size, 8 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee® HAMMERVAC™ 4253-1 Keyed Magnetic Motor, For Use With Electromagnetic Drill Press
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
Recently Viewed
REED tubing cutters are equipped with special wheels for stainless steel. REED wheels for stainless tubing use specialized steel for toughness and heat dissipation, resulting in long wheel life. T10SS, T15SS and T20SS tubing cutters offer a large knob for firm grip and easy turning, along with an internal reamer in the knob. TC11SS telescoping tubing cutter includes a fold-out reamer and spare wheel for stainless tubing.
Weiler® 44301 Perma-Flex Tip Mop Handle, 15/16 in Dia x 60 in L, Hardwood Handle/Plastic Tip, Natural
Weiler® 44301 Perma-Flex Tip Mop Handle, 15/16 in Dia x 60 in L, Hardwood Handle/Plastic Tip, Natural
Weiler® 42025 Threaded Tip Push Broom, 18 in OAL, 3-1/4 in L Trim, Maroon Polypropylene Bristle
Weiler® 42025 Threaded Tip Push Broom, 18 in OAL, 3-1/4 in L Trim, Maroon Polypropylene Bristle
60" WET MOP HANDLE - DQB29080 >
Remke Tuff-Sealâ„¢ 7304-004R Single Eye Wide Range Bus Drop Grip, 1000 lb Breaking Strength, 0.53 to 0.73 in Cable, Steel, Galvanized
Tuff-Sealâ„¢ Bus Drop Grips support flexible cord or cable at the bus duct when power is supplied from an overhead source. Suitable for indoor use only, these grips relieve tension and absorb vibration which protects the cable. These grips are woven of galvanized steel wire and are offered with either a single eye or universal bale.
ARCâ„¢ 0902011 Closed Premium Coated Abrasive Shop Roll, 50 yd L x 2 in W, 220 Grit, Aluminum Oxide Abrasive, Cloth/Cotton Backing
ARCâ„¢ 0902011 Closed Premium Coated Abrasive Shop Roll, 50 yd L x 2 in W, 220 Grit, Aluminum Oxide Abrasive, Cloth/Cotton Backing
