Oil Funnels & Can Oiler Accessories
Justrite® 28680 Non-Flammable Drum Funnel Cover, For Use With Closed Head 30 and 55 gal Drum, 2.5 gal Sump Capacity, Polyethylene, Black
Use these funnels with any closed-head 30- and 55-gallon (110- and 200-L) drums. Low-profile, wide diameter opening makes it for quick, easy pouring. Scalloped, sloped design minimizes splashes and prevents containers from resting in their own liquids. Large, flat well at the throat of funnel allows for passive draining of paint tins, filters, buckets and other containers. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.
RIDGID® 40640 Hex Nut, For Use With: Model 418 Bucket Assembly, 3/4-16
RIDGID® 40640 Hex Nut, For Use With: Model 418 Bucket Assembly, 3/4-16
RIDGID® 41655 Pump Repair Kit, For Use With #2 Pump Gun with Hose, 10883 Pipe Threading oiler
RIDGID® 41655 Pump Repair Kit, For Use With #2 Pump Gun with Hose, 10883 Pipe Threading oiler
RIDGID® 41660 Strainer, For Use With: Model 418 Oiler
RIDGID® 41765 Strainer, For Use With: Model 418 Bucket Assembly
RIDGID® 41765 Strainer, For Use With: Model 418 Bucket Assembly
RIDGID® 41775 Hose With Fittings, For Use With: Model 302/318 Oilers
RIDGID® 41775 Hose With Fittings, For Use With: Model 302/318 Oilers
RIDGID® 72327 4 Pump Gun With Hose, For Use With: Model 402 Utility Oiler, #4
RIDGID® 72327 4 Pump Gun With Hose, For Use With: Model 402 Utility Oiler, #4
RIDGID® 72332 Pump Gun, For Use With: Model 418 Oiler, #4
RIDGID® 72332 Pump Gun, For Use With: Model 418 Oiler, #4
S&K 590 Heavy Duty Center Tube Funnel, Galvanized, Steel, Metal
S&K 590 Heavy Duty Center Tube Funnel, Galvanized, Steel, Metal
Recently Viewed
Gates® Power Transmission Plant Master® 1-1/2X200 PLANT 250 BLACK Hose, 1-1/2 in Nominal, 200 ft L, 250 psi Working, EPDM
Plant Master® hoses carry an ARPM class C oil resistance rating meaning they are not to be used in any oily environment. Typical uses include air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides.
Drillco 675A148D 6750A Center Cutting Imperial Long Length Single End Finishing End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 55A124A 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 690A108A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 690A124A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 670A132B 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
