Flexible Hose Systems
Loc-Line® 40413 Hose Assembly Kit, 1/4 in ID, Acetal Copolymer
Loc-Line® 40413 Hose Assembly Kit, 1/4 in ID, Acetal Copolymer
Recently Viewed
Crescent® M6M7R Aviation Snip, 18 ga Cutting, Left/Right/Straight Snip, Ergonomic/Non-Slip Grip
The set contains Crescent Wiss® (1) Left and Straight Cut Aviation Snip and (1) Right and Staight Cut Aviation Snip. Their 30 degree angle offset allows for greater material low while cutting straight lines and left/right arcs. The made in USA snips cut up to 18 gauge low carbon, rolled steel. They are tested up to 500,000 cuts and engineered for superior performance.
5/16" 1/4"-DRIVE 12-POINT ELIMINATOR SOCKET - ARS10610>
1/4" 6-PT 1/4" -DRIVE DEEP SOCKET-ARS10208 >
3/16" 1/4"-DRIVE 12-POINT ELIMINATOR SOCKET - ARS10606>
1/4" 6-PT 3/8" -DRIVE SOCKET-ARS11008 >
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
