Candle Holders & Accessories
a highly powerful, specialized 180-watt Low Pressure Sodium (LPS) HID vapor lamp widely utilized for outdoor streetlights, highway lighting, and industrial security fixtures due to its distinct monochrome orange glow. Because traditional low-pressure sodium lamps are increasingly phased out by city authorities worldwide in favor of energy-efficient alternatives, finding precise legacy replacements can be difficult, and making a transition to modern LED retrofits is highly recommended.
35-WATT LOW SODIUM BULBS--#1069-A-BULSOX35 >
90-watt Low Pressure Sodium (LPS) High-Intensity Discharge (HID) light bulb. These highly efficient, tubular bulbs emit an intense monochromatic yellow-orange light (around 1700K to 1800K) and are traditionally used for streetlights, roadways, tunnels, bridges, and security area floodlighting. Because major manufacturers like Philips have largely discontinued traditional low-pressure sodium lamps, they are increasingly difficult to source, though third-party replacements and LED retrofit options are available.
CLEAR POLYCARBONATE GLOBE-APLT75TA >
1-GANG WEATHERPROOF HORIZONTAL DUPLEX OUTLET COVER - APLWHD1 >
3/4" CLOSURE PLUGS (BAG OF 4)-APLWPLG504 >
Recently Viewed
Square D™ Homeline™ HOM250 Standard Miniature Circuit Breaker, 120/240 V AC, 50 A, 10 kA Interrupt, 2 Poles, Thermal Magnetic Trip
Homeline miniature circuit breakers are engineered and designed for fast installation and superior circuit protection. Homeline circuit breakers are designed to plug into Homeline load centers to provide circuit protection. This circuit breaker provides standard circuit protection and is HACR rated. This 2 pole circuit breaker with plug in mounting is rated 50A at 120/240 VAC. HOM breakers provide 10 kA breaking capacity. The electrical connections are box lugs that will accept 1 wires. The box lugs will accept a wire range of 8 AWG to 2 AWG copper or aluminum wire. HOM Homeline miniature circuit breakers are UL Listed.
Dodge® 070768 Non-Expansion Type S-2000 Wide Slot Take-Up Spherical Roller Bearing, 3-7/16 in Dia Bore, 10.06 in L x 4.05 in W x 7.81 in H, 65500 lb Dynamic/81500 lb Static Load
These unit-housed, double-row spherical, mounted bearings have high ratings and long L10 lives. A variety of housing styles and sealing options allow for easy application on material and air handling machinery. Industry standard dimensions make the products interchangeable with many brands.
Gates® Power Transmission PowerGrip® HTD® 345-3M-09 Synchronous Belt, 9 mm W, 345 mm OAL, 3 mm Pitch, 115 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Apex® 49-B-TX-10 Power Drive Bit, T10 Torx® Point, 3-1/2 in OAL, Steel
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
