Trimmer Accessories
WLCM-105 ARNOLD/MTD
.105" X 30' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM105 >
WLCM-1105 ARNOLD/MTD
.105" X 222' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM1105 >
WLCM-165 ARNOLD/MTD
.065" X 582' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM165 >
WLCM-180 ARNOLD/MTD
.080" X 384' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM180 >
WLCM-195 ARNOLD/MTD
.095" X 273' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM195 >
WLCM-380 ARNOLD/MTD
.080" X 1152' COMMERCIAL GRADE TRIMMER LINE-ARNWLCM380 >
WLCM-395 ARNOLD/MTD
.095" X 819" COMMERCIAL GRADE TRIMMER LINE-ARNWLCM395 >
WLD-1105 ARNOLD/MTD
.105" X 235' RESIDENTIAL GRADE TRIMMER LINE-ARNWLD1105 >
WLD-1130 ARNOLD/MTD
.130" X 150' RESIDENTIAL GRADE TRIMMER LINE-ARNWLD1130 >
WLD-180 ARNOLD/MTD
.080" X 400' RESIDENTIAL GRADE TRIMMER LINE-ARNWLD180 >
WLD-195 ARNOLD/MTD
.095" X 285' RESIDENTIAL GRADE TRIMMER LINE-ARNWLD195 >
WLM-H80 ARNOLD/MTD
.080" X 192' COMMERCIAL GRADE TRIMMER LINE-ARNWLMH80 >
Recently Viewed
Browning® Gearbelt® 3514023 Type D Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-13/16 in W Face
Browning® Gearbelt® 3514023 Type D Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-13/16 in W Face
Browning® Gearbelt® 1430875 Type 2A Synchronous Timing Pulley Without Flange, 5/16 to 1 in Bore, 2.781 in OD, 44 Grooves, 2.801 in Dia Pitch, 9/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
MasterDrive R2-2.7/8 R2 Series Double Split Tapered Bushing, 2.87 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
MasterDrive R2-60MM R2 Series Double Split Tapered Bushing, 60 mm Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 4-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
