Incandescent - Flood Bulbs
20-T-6-1/2 130-volt Clear 20-watt Bulbs #
130-VOLT CLEAR 20-WATT BULBS #03015A-BUL20T61/2CL >
20-T-6-1/2-F 20-watt 120-volt Frost
20-WATT 120-VOLT FROST BULBS-BUL20T61/2F >
200-A-23 200-w 130-volt Inside Frost
200-W 130-VOLT INSIDE FROST BULBS-BUL200A23 >
200-A-23-RS 200-w Rough Surface
200-W ROUGH SURFACE BULBS-BUL200A23RS >
21219-A 7-watt 120-Volt BA-15d Base Bulbs
120-VOLT BA-15-D BASE BULBS
24152-B 9-w 120v Med Screw Base Flood Bulb
9-W 120V MED SCREW BASE FLOOD BULB-BUL24152B>
24160-A El16wr30 Flood Bulb W/self Ballast
EL16WR30 FLOOD BULB W/SELF BALLAST
24323-A 5k Medium Vanity Globe 9w
5K MEDIUM VANITY GLOBE 9W SELF BALLAST-BUL24323A >
25-A 25-watt Inside Frost Bulb #108h&
25-WATT INSIDE FROST BULB #108H&116D-BUL25A >
25-A-15 25-watt Frosted Bulbs
25-WATT FROSTED BULBS 1650-C-BUL25A15 >
25-A-19-12-V 25-watt 12-volt Frosted
25-WATT 12-VOLT FROSTED BULBS-BUL25A1912V >
25-A-RS-130VRED 25-watt Rough Surface Red Light
25-WATT ROUGH SURFACE RED LIGHT BULBS-BUL25ARS130VRED >
25-T-10/CL 25-watt Tubular Clear Light Bulbs
25-WATT TUBULAR CLEAR LIGHT BULBS
25-T-8-C 25-watt 130-volt Clear Bulbs #
25-WATT 130-VOLT CLEAR BULBS #158-C-BUL25T8C >
250-BR-40-1-SS 250-watt Shatter Shield Heat Bulbs
250-WATT SHATTER SHIELD HEAT BULBS
250-R-40-1-SS 250-watt Heat Bulb With Safety
250-WATT HEAT BULB WITH SAFETY SHIELD-BUL250R401SS >
25711-A 10-Watt 130-Voltm Screw-In-Base Intermediate Light Bulb
10-WATT 130-VOLT WHITE "E-17" SCREW-IN-BASE INTERMEDIATE LIGHT BULB
Recently Viewed
Browning® 1076892 QD Bushing, 7/8 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
Browning® 1076645 QD Bushing, 1 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Jacobs® 14445 34-33 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3
Jacobs® 14445 34-33 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
Morse® 177368 MHS Advanced Hole Saw, 2-1/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
