PRESSURE WASHER & ACCESSORIES
MG-36-BCA 36" Pressure Washer Wand With Molded
36" PRESSURE WASHER WAND WITH MOLDED GRIP - VALMG36BCA>
8711873 3/8" X 1/2-fpt Swivel 5000-PSI
3/8" X 1/2-FPT SWIVEL 5000-PSI-SPM8711873>
462629 Pressure Washer High Volume Unloaders
YU HIGH VOLUME UNLOADER
21 GPM - TEMP 200 F - 4350 PSI
1/2" FPT INLET, OUTLET.
2 - 1/2" FPT BYPASS PORTS
FORGED BRASS BODY
SS INTERNALS
368909-PS Pressure Washer Grips With Side Handles
PRESSURE WASHER GRIPS WITH SIDE HANDLES-SPM368909PS >
368909-P Pressure Washer Lance Handles
PRESSURE WASHER LANCE HANDLES-SPM368909P >
368736 Pressure Washer Lance Wands
36" 1/4" NPT Both Ends Lance Wand
368378 78" Pressure Washer Sprayer Tubes
78" LONG TUBE THREADED ON EACH END (NO HANDLE OR GUN)
36815-X Pressure Washer 36" 3000-PSI Double Lance
FIBERGLASS TELESCOPING WAND
PSI 3500 - TEMPERATURE 200 F - 6' TO 12' LONG
368090 P/WASHER 72"/144" TELESCOPING WAND
FIBERGLASS TELESCOPING WAND
PSI 3500 - TEMPERATURE 200 F - 6' TO 12' LONG
353010 Pressure Washer Trigger Spray Guns
AP-1000 LEGACY PRESSURE WASHER 4500-PSI TRIGGER SPRAY GUN
3/8"-FPT X 1/4"-FPT OUTLET
12-GPM TEMPERATUE: 300-DEGREES FARENHEIT
352243 Pressure Washer Heater Duty Guns/ No Wands
SUTTNER RELAX ACTION DESIGN,STAINLESS STEEL GUN
5000 PSI - GPM 12 - TEMP: 300 F -
3/8" FPT INLET X 1/4" FPT OUTLET
W/O LANCE OR NOZZLES
352238 5000-psi Pressure Washer Trigger Spray Guns
5000-PSI PRESSURE WASHER TRIGGER SPRAY GUNS
331121 3/8"-fpt Qc-style Coupler Plugs
3/8"-FPT QC-STYLE COUPLER PLUGS
331120 3/8"-mpt Qc-style Coupler Plugs
3/8"-MPT (MALE PIPE THREAD) QC-STYLE PRESSURE WASHER COUPLER MALE PLUG
331031 1/2"-fpt Stainless Steel Couplers
1/2"-FPT STAINLESS STEEL COUPLERS
331021 3/8" Female Quick Coupler
3/8" FEMALE P/WASHER QUICK COUPLERS
331020 3/8" MPT QUICK CONNECT BRASS COUPLERS
3/8" BRASS COUPLERS
259633 Pressure Washer 5.0 40-degree Q-style Nozzles
PRESSURE WASHER 5.0 40-DEGREE Q-STYLE NOZZLE
259631 Pressure Washer 5.0 15-degree Q-style Nozzle
PRESSURE WASHER 5.0 15-DEGREE Q-STYLE NOZZLE
Recently Viewed
BBI 11463 1960 Socket Cap Screw, 3/4-10, 1-3/4 in OAL, Heat Treated Alloy Steel, 3A Grade
BBI 11463 1960 Socket Cap Screw, 3/4-10, 1-3/4 in OAL, Heat Treated Alloy Steel, 3A Grade
PIX BX-80 IS A COGGED, CLASSICAL V-BELT 83" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX80 >
Gates® Power Transmission Hi-Power® II PowerBand® 12/B68 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 71 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
1000-LB SIDE-WIND TRAILER JACK WITH WHEEL - VALTJ0601K >
FYH® SB206 19KP8G5 SB Series Lightweight Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SB206 19KP8G5 SB Series Lightweight Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
Dodge® 131837 207 Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
