HVAC Circuit Breakers
15-AMP 2 POLE GE CIRCUIT BREAKER-GEHTHQL215>
20-AMP 2-POLE GE CIRCUIT BREAKERS-GEHTHQL2120>
25-AMP 2-POLE GE CIRCUIT BREAKER-GEHTHQL2125>
30-AMP 2-POLE GE CIRCUIT BREAKER - GEHTHQL2130>
30-AMP 2-POLE GE GROUND FAULT CIRCUIT BREAKER - GEHTHQL2130GF1>
40-AMP 2-POLE GE CIRCUIT BREAKERS-GEHTHQL2140>
50-AMP 2-POLE GE CIRCUIT BREAKERS-GEHTHQL2150>
60-AMP 2 POLE 230B CIRCUIT BREAKER-GEHTHQL2160>
30-AMP 1-POLE GE CIRCUIT BREAKER - GEHTHQP130>
30-AMP 2-POLE GE CIRCUIT BREAKER - GEHTHQ230>
Recently Viewed
MORSE® 32438 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/8-24 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
ITM 207SP0015 Heavy Duty Drill Bit, #15 Drill - Wire, 0.1800 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
Carlon® E982EFN Type FSC Non-Metallic Rigid Shallow Style Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.54 in L x 2.8 in W x 2.42 in D
Carlon® E982EFN Type FSC Non-Metallic Rigid Shallow Style Device Box, PVC, 18 cu-in Capacity, 1 Gangs, 2 Outlets, 2 Knockouts, 4.54 in L x 2.8 in W x 2.42 in D
BANJO H-025-050 POLYPROPYLENE HOSE FITTING, ADAPTER, 1/4" NPT MALE X 1/2" BARBED
ADAPTER FOR CONNECTING PIPES OR HOSES OF DIFFERENT TYPES. CONNECTS A HOSE ON ONE END AND A FEMALE NPT THREADED CONNECTION ON THE OTHER. GLASS-REINFORCED POLYPROPYLENE FOR RIGIDITY, LIGHTWEIGHT, DINENSIONAL STABILITY, AND RESTANCE TO HEAT, CORROSION, MOST CHEICALS, AND HIGH IMPACT. INTEGRAL HEX NUT FOR USING A WRENCH TO TIGHTEN THE FITTING. MAXIMUM WORKING PRESSURE OF 150 PSI AT 70 DEGREES F
- BAJHB025050 >
The DWE4559N angle grinder has a high power 4.7 hp motor with overload protection and 6,500 rpm for optimal material removal with 9 in grinding wheels. Dust ejection System™ prevents harmful dirst from entering the motor.
GEARWRENCH® 9613N Open End Regular Length Reversible Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 6.902 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
