Condenser/Air Conditioner Accessories
This DiversiTech® DST-6 Hard Start Kits, Torque Plus, 500% Torque Multiplier DST 6 offers a larger capacitor for severely hard to start compressors. The DST 6 can be used on all PSC single phase compressors from 1 1/2 to 10 Horse Power A unique combination of relay and safety timer.
Recently Viewed
Gardner Bender 21-101 Ring Terminal, 22 to 16 AWG Conductor, Insulated Barrel, Vinyl, Red
The Gardner Bender™ quick and always reliable crimp-type wire terminals feature color-coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high degree of protection and carry a maximum 600 V rating. Temperature ratings for the complete line are 75 deg C (167 deg F). You will find various terminals for various circuit protection devices, all insulated to last for those any environments. Gardner Bender terminals are leading the industry in quality and durability.
Working Load Limit (WLL): 850 lbs (approx. 385 kg) Safety Factor: 5:1 design ratio (Ultimate break strength of 4,250 lbs)Material: Forged steel, quenched and tempered Finish: Hot-dip galvanized for enhanced corrosion resistance Connection Type: Jaw-to-eye configuration with a 1/4-inch pin and retention cotter pin Dimensions: 2.63 inches width between eyes, 0.69" to 0.88" eye length
60' X 58 T-12" 50 WATT DAYLIGHT FLUORESCENT BULBS-BULF60T12D >
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
3/4"-DR 1350-FT/LB AIR IMPACT WRENCH - ING2141>
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
